This authentic manufacturer-supplied washer is specially designed for use with Echo chainsaws. It is a special hardware that helps to provide a tight seal between connected components of the clutch mechanism. This is an identical replacement for a missing or a damaged part that was installed on a new unit. One durable metal part is included. Refer to the appropriate diagrams for your model to ensure the proper replacement procedure. A screwdriver and a wrench set will be needed to take apart and reassemble the housing to perform this repair.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Repair ECHO chainsaw
Clutch on my ECHO chainsaw finally gave up the ghost. Middle of winter here with trees falling. Ordered replacement part from ereplacement which was easy to identify via their parts diagram. Arrived within a few days. Fit appropriately and chainsaw was back in action. As easy of an online transaction as one could hope for. Not my first online purchase with this company. I will continue to return to them for replacement parts.
Guest - March 16, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the outer housing. Remove the chain bar and chain. Remove excess dirt and foreign material. Removing the old clutch assembly is the most difficult part because the clutch assembly has to be struck with a hammer and punch to remove from threaded shaft. The thread is a left hand. Once removed, clean the area and replace the clutch a
... Read moressembly. Reassemble the chain bar and housing.
Removed clutch assembly, by turning the spring as a left-handed thread. The punch was placed on the shoulder of the GÇ£YGÇ¥ piece of the spring assembly. Then all pieces were removed and replaced. There is a socket available that will fit the front of the spring assembly, and using an impact can remove the spring assembly.
First I removed the spark plug and put an old starter rope in the hole to stop the piston moving without damage to it. I put the chisel on the off side (right hand side) of the clutch and tapped hard to remove. I then replaced the washer/plate clutch and reversed the above process tapping the clutch back on the crankshaft.(this time h
... Read moreitting the left side)
I first changed to a new bar and chain; problem persisted. Then I went to also change the sprocket and needle bearing, and noticed the clutch washer excessively worn, so I obtained the both washers. I don\'t have any experience to know whether this solved the problem, but the only other thing that I can change is the bar hold down itself.
... Read more
In order to remove the clutch, with the bar and chain already off, remove the spark plug and feed some rope into the cylinder. Keeping the engine upright so the rope does not fall into the intake or exhaust ports, turn the clutch CCW (for the left-handed thread holding it on the crankshaft) until the piston stops against the wadded rope. Then take a large screwdriver against a good surface on the clutch and pop it with a hammer CCW. Reverse the above to complete the process.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP8898255
Manufacturer Part Number: 17501939430
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Transmission or Clutch","title":"Transmission or Clutch","url":"/parts/lawn-and-garden/chainsaw/transmissions-and-clutches/"},{"position":2,"name":"17501939430","title":"17501939430","url":""}]
_WW_3.gif "Part Location Diagram of 17501939430 Echo Plate-clutch")
_WW_3.gif "Part Location Diagram of 17501939430 Echo Plate-clutch")
