Part Location Diagram of 14551013931 Echo Gasket-muffler
See part C-88 in the diagram
( Grid squares measure 1x1 inch )

Gasket-muffler 14551013931

Manufactured by:
Echo
ERP Number:
ERP8866895
Part Number:
14551013931
Original Equipment Manufacturer ?
$6.16
On Order
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is an original Echo replacement part manufactured for use with chainsaws. The gasket forms a seal between the muffler and the small block. It is recommended to replace gaskets when servicing small engines to ensure a good seal when the parts are reassembled. The gasket is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Echo
This part works with the following products:
  • Chainsaw

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Echo CS-305 stopped running after air filter came off

Kevin from Bessemer, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
I was cutting wood and noticed the engine starting to run bad. I then noticed the air filter and cover had fell off. Wood debris got sucked into the carb intake. My first immediate purchase was a new echo carb which did not fix the issue. After research, I found that there was a reed valve that the carb mounted to that was stuck open caus ing no fuel or compression. 2 strokes are way different than a 4 stroke engine. After replacing the parts with the original carb, it fired right up and idled perfectly. So easy to replace. 4 screws, fuel line connectors and throttle linkage was only thing that had to be touched.
I did replace the muffler gasket which was 2 bolts. I did this to clean the flame arresting screen. Very easy too.
Did you find this story helpful?
Thank you for voting!

Gasket blew

Joe from Sellersville, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
14551013931
Remove side cover, remove both muffler bolts install gasket and reverse
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8866895
Manufacturer Part Number: 14551013931
Brand Model Number Description
Echo CS-280E Chainsaw - Chainsaw
Echo CS-280EP Chainsaw - Chainsaw
Echo CS-290EVL Chainsaw - Chainsaw
Echo CS-290EVLP Chainsaw - Chainsaw
Echo CS-300 Chainsaw - Chainsaw
Echo CS-3000 Chainsaw - Chainsaw
Echo CS-300EVL Chainsaw - Chainsaw
Echo CS-301 Chainsaw - Chainsaw
Echo CS-303T Chainsaw - 30.1cc Top Handle Chain Saw
Echo CS-305 Chainsaw - Chainsaw
Echo CS-306 Chainsaw - C07511001001 - C07511999999 Chainsaw
Echo CS-340 Chainsaw - Chainsaw
Echo CS-3400 Chainsaw - Chainsaw
Echo CS-341 Chainsaw - Chainsaw
Echo CS-345 Chainsaw - Chainsaw
Echo CS-3450 Chainsaw - Chainsaw
Echo CS-346 Chainsaw - Chainsaw
Echo CS-350TES Chainsaw - Chainsaw