Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
8848766-1-M-Toro-119-1567-Wheel-friction
Part Location Diagram of 119-1567 Toro Wheel-friction
See part D-2 in the diagram
( Grid squares measure 1x1 inch )
8848766-1-S-Toro-119-1567-Wheel-friction Part Location Diagram of 119-1567 Toro Wheel-friction

Wheel-friction 119-1567

Manufactured by:
Toro
ERP Number:
ERP8848766
Part Number:
119-1567
Original Equipment Manufacturer ?
$72.83
On Order

A Bit Difficult 

1- 2 hours 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Troubleshooting Repair Instructions Model Cross Reference

Troubleshooting

This part works with the following brands:
  • Toro
This part works with the following products:
  • Snow Blower
  • Chainsaw
  • Power Broom
Part# 119-1567 replaces these:
119-1567,

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Snowblower would not throw snow very far

Brent from Thayne, Wyoming

4 of 4 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Socket set, Wrench (Adjustable)
Parts Used:
120-9272, 120-3892, 119-7640, 26-6120, 26-6110, 119-1567
1. Remove upper & lower cover.
2. Remove drive belt from auger shaft.
3. Remove drive pulley assembly to access auger pulley bolt.
4. Remove auger pulley bolt & pulley.
5. Remove pulley flange with gear puller.
6. Remove bolts from auger shaft bearing & remove auger bearing, bearing cups & thrust washer. ... Read more />7. Install new thrust washer, bearing & bearing cups.
8. Reinstall remaining parts in reverse order.
9. Adjust tension on auger drive cable.
Read less
Did you find this story helpful?
Thank you for voting!

friction wheel, auger shaft bushing assemble, nylon bushings for friction wheel pivot plate

John from OCONTO FALLS, Wisconsin

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench set
Parts Used:
119-1567
split front auger assembly from rear section. remove auger assembly. remove bushing assembly. install new bushing assembly. install new nylon bushing in pressure plate. install all new belts as needed. install new cables as needed. Note this toro snow blower is 15 years old and needed all parts talked about. install new bolts nylock nuts, etc as necessary. torque as need. loctight parts as required. reassemble the auger housing to the rear assembly. make all required adjustments to linkage, cables, etc. should be good for a lot of years again. Also adjusted skids, scraper as needed. was able to attain information off the internet. this was my first go around with snow blower repair. made sure to use never seize as required
Read less
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8848766
Manufacturer Part Number: 119-1567
Brand Model Number Description
Toro 23740 Chainsaw - Walk-behind Rotary Broom, 2013
Toro 23741 Power Broom - 23741, Power Broom, (Sn 400000000-999999999)
Toro 31875 Snow Blower - Power Max E26 60v Snowthrower
Toro 37770 Snow Blower - 724 OE Power Max Snowblower
Toro 37771 Snow Blower - 726 OE Power Max Snowblower
Toro 37772 Snow Blower - 826 OE Power Max Snowblower
Toro 37775 Snow Blower - Toro Snowblower Model 37775 Parts
Toro 37777 Snow Blower - Toro Snowblower Model 37777 Parts
Toro 37779 Snow Blower - Toro Snowblower Model 37779/Serial: 316000001-316999999/2016 (37779/Serial:316000001316999999/2016, 37779/Serial: 316000001 316999999/2016) Parts
Toro 37780 Snow Blower - Toro Snowblower Model 37780/Serial: 316000001-316999999/2016 (37780/Serial:316000001316999999/2016, 37780/Serial: 316000001 316999999/2016) Parts
Toro 37781 Snow Blower - Toro Snowblower Model 37781/Serial: 316000001-316999999/2016 (37781/Serial:316000001316999999/2016, 37781/Serial: 316000001 316999999/2016) Parts
Toro 37793 Snow Blower - Power Max 824 Oe Snowthrower
Toro 37797 Snow Blower - Power Max 826 Oxe Snowthrower
Toro 37798 Snow Blower - Power Max 824 Oe Snowthrower
Toro 37799 Snow Blower - Power Max 826 Oxe Snowthrower
Toro 37802 Snow Blower - 37802, Power Max 826 Ohae Snowthrower, (Sn 400000000-408727583)
Toro 37805 Snow Blower - Power Max 826 Ohae Snowthrower
Toro 38595 Snow Blower - Toro Snowblower Model 38595 Parts
Toro 38597 Snow Blower - Toro Snowblower Model 38597 Parts
Toro 38610 Snow Blower - Snowthrower
Toro 38611 Snow Blower - Snowthrower
Toro 38614 Snow Blower - 726 OE Power Max Snowblower
Toro 38620 Snow Blower - Snowthrower
Toro 38621 Snow Blower - Snowthrower
Toro 38622 Snow Blower - Snowthrower
Toro 38624 Snow Blower - Snowthrower
Toro 38624W Snow Blower - Toro Snowblower Model 38624W Parts
Toro 38629 Snow Blower - Snowthrower
Toro 38629C Snow Blower - Snowthrower
Toro 38630 Snow Blower - Snowthrower
Wheel-friction
$ 72.83
On Order
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖