Part Location Diagram of 11060-2094 Kawasaki Gasket-intake Manifold
See part B-11060B in the diagram
( Grid squares measure 1x1 inch )

Gasket-intake Manifold 11060-2094

Manufactured by:
Kawasaki
ERP Number:
ERP8838775
Part Number:
11060-2094
Original Equipment Manufacturer ?
$5.95
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Difficult 

More than 2 hours 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

A genuine item which is supplied directly from the original equipment manufacturer for use with Kawasaki engines commonly installed on lawn and garden equipment. It is a high-quality gasket which is utilized to provide an air-tight seal for the intake-manifold, over time the material may wear out and begin to crack eventually requiring a replacement. Keep in mind this durable gasket is made of durable composite material and is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Kawasaki
This part works with the following products:
  • Engine

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Difficult 

More than 2 hours 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Air from cylinder blows coolant out of cooling system, leaking cylinder head gasket

Wilbert from EVANSVILLE, Indiana

2 of 2 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Socket set, Wrench set
Download Kawasaki FD440V service manual for torques.
Disconnect spark plug wires.
Drain coolant, remove cooler, fan, cooler support bolts and fan duct for access to manifold bolts.

Special note: cooler stand off bolts have \"non-permanent\" thread lock agent on engine housing thread. Cooler support bolt may brake off in engine housing , Drill broken bolt out of the engine housing. do not use an \"easy-out\" to remove bolt. the \"easy-out\" will break off in the hole. The broken \"easy-out\" can be removed by grinding. otherwise total job is less than 2 hours.

Disconnect exhaust and intake manifold from cylinder heads.
Disconnect sensor and hoses from left cylinder
Remove valve cover and cylinder heads
Clean the surfaces that contact the head and intake gaskets. do not scratch the surfaces.
Install head gasket and intake manifold gaskets.
Torque cylinder head bolts.
Re-install valve cover, cooling system parts and re-connect sensor
Add coolant and leak-check head gaskets by cranking engine and looking for air bubbles in coolant.
Install exhaust gaskets
Connect spark plug wires
Test run engine
Did you find this story helpful?
Thank you for voting!
  • 1