This is a genuine manufacturer-approved component which is designed for Toro and Lawn Boy riding lawn mowers and garden tractors. It is an identical replacement for a missing or a damaged pulley-idler that was installed on a new unit. This part applies tension on the belt. Refer to the owner's manual and the appropriate diagrams for your model to ensure the correct repair procedure. Note, this high-quality pulley-idler is made of a durable material and is sold individually. A wrench set will be needed to perform this repair.
Troubleshooting
This part works with the following brands:
Toro
Lawn Boy
This part works with the following products:
Lawn Tractor
Lawn Mower
Part# 110-6775 replaces these:
110-6775,
★
Customer Part Reviews
?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
the Parts were on time
The parts fit perfect
Guest - August 22, 2020
Verified Purchase
★★★★★
★★★★★
Idle pulley
Works great good response time
Guest - October 14, 2022
Verified Purchase
★★★★★
★★★★★
easy to repair
Thanks
Paul - May 3, 2024
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed the mower deck.
Removed right hand wheel well/instrument control panel panel with torx screw driver.
Jacked the front of the z mower up.
Used 7/16 socket to remove and replace pully.
Let the jack down and removed it.
Reinstalled the mower deck.
Replaced the shoulder bolt and washer on steering
... Read moredamper. Using a torx screw driver.
Reinstalled the right hand panel using a torx screwdriver.
Read less
Did you find this story helpful?
Thank you for voting!
Power spindel snapped off from PTO of zero turn mower. Belt was extreamly worn. All equiptment was still Factory
Removed deck, lifted and removed right rear wheel for access. Removed tensioner then belt.
Removed nut to spindel that broke as well as second one that I removed just to have two new ones. Replaced spindels and new belt. Connected tensioner and spring. Replaced tire and dropped mower and reattached deck.
I also cleaned a
... Read morend greased all certs and cleaned all electrical.
I went ahead and replaced the oil and filter using Rotella that I\'m a fan of. Mower engine noise was reduced to new quality. Replaced and plugs, removed carb bowl and cleaned carb and jets. Adjusted carb.
The deck is tore all to heck as I\'ve abused the heck out of my TORO with a Kawasaki motor. Still great but the deck is done. Otherwise, I think it would last another 13 years.
Read less
Did you find this story helpful?
Thank you for voting!
Mower would not start replaced the battery and starter. No good. The idler fell apart and was eating my belt.
Jacked it up pulled the keeper off the clutch unplugged the clutch wire. Had to use a small screwdriver to raise the keeper clip. Took the spring off the take up idler Changed the idlers and belt. Then put the spring back on.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(2010)_WW_9.gif "Part Location Diagram of 110-6775 Toro Pulley-idler")
(2010)_WW_9.gif "Part Location Diagram of 110-6775 Toro Pulley-idler")
