Remove battery, remove the screws from the housing, carefully separate the housings. Noting were are the internal parts are located. Remove the terminals from the old motor and remove it. Install the new motor and attach the terminals. Make sure all of the parts are in their correct spot. Then screws then housing back together.
The motor is modular, cannot replace brushed. *Split driver case and removed motor (before removing motor note where slide on connectors are and how the motor sits in the case) it comes free of heliacal gears at drive end. Small plastic place needs to be switched from drive end of old motor to new. Be careful when reassembling that the re
... Read moreversing switch engages with the slot red plastic slide.
*Splitting the case involves not only the torx screws but removing a u shaped clip at the back of the battery compartment. I popped it out with a small screwdriver holding the drill upside down so that the clip wouldn\'t fly across the room.
Read less
Did you find this story helpful?
Thank you for voting!
Only slight rotation & smell of burning plastic when trigger engaged - impact driver/drill dropped, forward/reverse switch broken
1) Removed small torx screws and u-clip holding two halves of drill/impact driver together
2) Removed broken forward/reverse button
3) Removed motor assembly from unit
4) Removed planetary gear box with two screws & two wires (both w/push-on clips) from motor
5) Replaced broken forward/reverse button
5) Repl
... Read moreaced planetary gear box with two screws & two wires (both w/push-on clips) back onto motor
6) Installed motor assembly into two plastic halves of drill/impact driver
7) Installed u-clip in bottom of handle and re-installed all torx screws
8) Tested with freshly charged 12V battery, problem solved -
9) Bought parts based on guess guided by experience - issue was bad/burned out over used motor
Read less
Did you find this story helpful?
Thank you for voting!
Motor had bad spot were it would stick and to free it I used driver to move fan a little then it worked
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 2607022840 Bosch Tool MOTOR")
_WW_1.gif "Part Location Diagram of 2607022840 Bosch Tool MOTOR")
