Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Worked great, the part saved me close to $100 rather than buying a new drill
Thanks for being there, love your website. I have ordered parts for my chopsaw, drill and lawnmower and they all fit perfectly. All you have to do is put yur model# in and it goes right into it showing the parts diagram and all the parts that are available. I give you more than a 5 star rating.
Guest - April 24, 2020
Verified Purchase
★★★★★
★★★★★
Adjusting Slide arrived quickly and fit perfectly. Thank You
Thanks!
Guest - March 27, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Just remove the torx screws and the stainless steel clip that holds the two halves together.
Separate the two halves.
The new slide plastic slips in to place with a little wiggling. Put screws and clip back together and in 10 minutes you are back in business.
1. remove battery
2. removed seven screws on the housing
3. pry open the handle
4. remove broken slide
5. install new slide
6. replace handle
7. before reinserting the screws:
make sure the slide operates nice and easy
make sure that the battery terminals are still al
... Read moreigned correctly- try to slide the battery in!
8. insert screws and tighten
Read less
Did you find this story helpful?
Thank you for voting!
Only slight rotation & smell of burning plastic when trigger engaged - impact driver/drill dropped, forward/reverse switch broken
1) Removed small torx screws and u-clip holding two halves of drill/impact driver together
2) Removed broken forward/reverse button
3) Removed motor assembly from unit
4) Removed planetary gear box with two screws & two wires (both w/push-on clips) from motor
5) Replaced broken forward/reverse button
5) Repl
... Read moreaced planetary gear box with two screws & two wires (both w/push-on clips) back onto motor
6) Installed motor assembly into two plastic halves of drill/impact driver
7) Installed u-clip in bottom of handle and re-installed all torx screws
8) Tested with freshly charged 12V battery, problem solved -
9) Bought parts based on guess guided by experience - issue was bad/burned out over used motor
Read less
Did you find this story helpful?
Thank you for voting!
The slide switch to go forward and reverse was broken.
Took the torx screws out, remove the keeper pin in the handle. Split the handle apart. Blew the dust out and place to slide in the handle. Replace the torx screws. Works like new again!
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 2601099153 Bosch Tool ADJUSTING SLIDE")
_WW_1.gif "Part Location Diagram of 2601099153 Bosch Tool ADJUSTING SLIDE")
