- This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
- New stock is on the way! On order parts usually ship within 7 business days.
- Item is not in stock and usually ships 10-15 business days from the time you place your order.
- This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
GREASE TUBE 1615430005
- Manufactured by:
- Bosch Tool
- ERP Number:
- ERP19504308
- Part Number:
- 1615430005
$17.20
In Stock
Delivers in 3-5 Business Days!
Does this part fit my model?
Need help finding your model number?Frequently Purchased Together
?Troubleshooting
This part works with the following brands:
- Bosch
This part works with the following products:
- Hammer Drill
Part# 1615430005 replaces these:
1615430005,
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
It wouldn\'t hammer very well
Geoff from Horseshoe Bend, Idaho
8 of 8 people
found this instruction helpful.
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
- Parts Used:
- 1615430005, 1610210187
1. Removed and cleaned old grease off all parts
2. Replaced the piston o-ring and re greased everything
3. Noticed the hammer pin seemed tight so greased and loosened it.
4. Put it all back together and it works much better. I think the final hammer pin was the biggest problem since no grease was used when installing bi ... Read more ts previously.
2. Replaced the piston o-ring and re greased everything
3. Noticed the hammer pin seemed tight so greased and loosened it.
4. Put it all back together and it works much better. I think the final hammer pin was the biggest problem since no grease was used when installing bi ... Read more ts previously.
Read less
Did you find this story helpful?
Thank you for voting!
leaking old grease
Frank from DOYLESTOWN, Pennsylvania
1 person
found this instruction helpful.
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
- Parts Used:
- 1617000163, 1615430005, 1610283019, 1610210106
watched on e replacement video
Did you find this story helpful?
Thank you for voting!
piston and oil sealer
luis from san juan, Puerto Rico
0 of 1 people
found this instruction helpful.
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
- Parts Used:
- 1615430005, 1610283035, 1610210179, 1610210176
the pistom broken in to the chamber and damage oil sealer grease and o ring (metal particles) solution:...clean all the entire chamber and trasmision and removing all metal particles and then proceed to install all the pieces ordered and ready...Ihave excellent tools completely renewed
Did you find this story helpful?
Thank you for voting!
Hedge trimmer blade stopped oscillating.
Craig from Johns Creek, Georgia
0 of 1 people
found this instruction helpful.
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
- Parts Used:
- 1615430005, 90554972, 148902-00, 90526767, 488059-00SV, 478565-00, 478564-00, 477930-00, 394476-00
1. Remove handle and blade guard.
2. Remove all screws. Screw has star and blade slot.
3. Separate two halves.
4. Use latex gloves.
5. Remove all parts from the motor to the blade gear.
6. Remove the grease that is contaminated with iron fillings from the stripped gear.
7. Add half the tube of new grea ... Read more se.
8. Starting at motor, assemble the new parts, slide them into place.
9. Add the remaining grease.
10. At this point, I replaced the switch lock.
11. Assemble the halves and replaces the screws.
The screws are self threading. Turn the screw to the left to feel a little click. Tighten screw.
12. Replace the blade guard and handle.
13. Clean the blade and lubricate it.
14. Test to verify the Hedge Trimmer is running properly.
2. Remove all screws. Screw has star and blade slot.
3. Separate two halves.
4. Use latex gloves.
5. Remove all parts from the motor to the blade gear.
6. Remove the grease that is contaminated with iron fillings from the stripped gear.
7. Add half the tube of new grea ... Read more se.
8. Starting at motor, assemble the new parts, slide them into place.
9. Add the remaining grease.
10. At this point, I replaced the switch lock.
11. Assemble the halves and replaces the screws.
The screws are self threading. Turn the screw to the left to feel a little click. Tighten screw.
12. Replace the blade guard and handle.
13. Clean the blade and lubricate it.
14. Test to verify the Hedge Trimmer is running properly.
Read less
Did you find this story helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19504308
Manufacturer Part Number: 1615430005
Manufacturer Part Number: 1615430005
| Brand | Model Number | Description |
|---|---|---|
| Bosch | 0600000000 | Chainsaw - Lubricating Grease |
| Bosch | 0611214839 | Hammer Drill - Rotary Hammer |
| Bosch | 11214EVS | Hammer Drill - Rotary Hammer |
| Bosch | 11223EVS | Hammer Drill - Rotary Hammer |
| Bosch | 11224VSR | Hammer Drill - Hammer Drill |
| Bosch | 11230EVS | Hammer Drill - Hammer Drill |
| Bosch | 1508 | Nibbler & Shears - (060034) 8 Gauge Shear |
| Bosch | GBH5-40DCE | Hammer Drill - Rotary Hammer |
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖