The pressure gauge attaches to the pressure reducer and displays the amount of air pressure in the tank. It is made of plastic and metal and is sold individually. It is a genuine OEM sourced part which is specifically designed for use with Bostitch compressors. If the gauge starts to leak air it will need to be replaced. During installation, a wrench may be needed to replace this part.
1. Removed the cover.
2. Removed the quick coupler, both pressure gauges, and the pressure adjuster body.
3. Installed the new pressure adjuster.
4. Installed the new gauges.
5. Installed the quick coupler and the cover.
Did you find this story helpful?
Thank you for voting!
Adjustment knob in pressure reducer failed, turned without effect.
Wendell from Duluth, Georgia
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1. Removed air outlet hose quick connect part.
2. Removed plastic shell covering.
3. Removed old pressure gauge and pressure reducer parts.
4. Installed new pressure reducer with vinyl tape on threads.
5. Installed new pressure gauge with vinyl tape on threads.
6. Installed plastic shell covering.
7. In
... Read morestalled air outlet quick connect part with vinyl tape on threads.
I am adept mechanically, but inexperienced in this operation. Had to back up a time or two causing delays.
Read less
Did you find this story helpful?
Thank you for voting!
could not adjust pressure
Rob from Whiteville, North Carolina
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Removed shroud with two 8mm sockets and two 1/4 inch extensions. One on each end of shroud bolts. Changed all connections. Retaped all connections with Teflon. Replaced both broken gauges. It\'s a 10 year old Stanley Bostich and it works great now. My wife and I install floors for a living so our tools have to work. Thanks!
Unscrewed the bad quick disconnect and pressure gauges and replaced with the correct parts that were ordered.The repair was easy using the correct parts and following the use instruction sheet. I would recommend Replacement parts because they were easy to order from and they sent the right parts the first time with no problems. If I ca
... Read moren do it anyone can. T. Foster
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
