Power Cord Replacement - Ridgid Model R3205 Circular Saw
GÇó Using a flat-tip screwdriver, remove the two round (black) plastic brush covers, remove both \'spring-loaded\' carbon brushes.
GÇó Using a T25 driver, remove the (silver) cap-nut that maintains the lever for adjusting depth of cut. The cap-nut and lever assembly are
... Read more spring loaded, remember how the components stack.
GÇó Using a T25 driver, remove the remaining eight (8) housing attaching screws.
GÇó Remove the full end-housing by carefully sliding it off of the armature. A flat tip screwdriver may assist by separating the housing at the hand grip.
GÇó Using a phillips-head screwdriver, remove the two small screws that attach the old power cord wire-terminals to the on-off trigger switch.
GÇó Remove and replace the old power cord and strain relief boot.
GÇó Re-assemble the unit using the reverse order of the above.
Note: All screws are CCW to loosen / CW to tighten. End/hj
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18696032
Manufacturer Part Number: 551060003
Circular Saw
- R3205 7-1/4 In. Circular Saw 5-25-21 (Rev:05)
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
