Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
18687285-1-M-Ryobi-089037006705-SWITCH ASSEMBLY
( Grid squares measure 1x1 inch )
18687285-1-S-Ryobi-089037006705-SWITCH ASSEMBLY 18687285-2-S-Ryobi-089037006705-SWITCH ASSEMBLY 18687285-3-S-Ryobi-089037006705-SWITCH ASSEMBLY

SWITCH ASSEMBLY 089037006705

Manufactured by:
Ryobi
ERP Number:
ERP18687285
Part Number:
089037006705
Original Equipment Manufacturer ?
$40.48
★★★★★
★★★★★
7 Reviews
Special Order

A Bit Difficult 

15 - 30 mins 

(23 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Troubleshooting Reviews Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

Genuine Ridgid replacement part, this item is sold individually. This is the power switch for the Ridgid Table Saws shown below. It is attached to the saw by using four of the part number 089037006048 Screw. For unauthorized use of the saw, you can remove the 089037006045 Switch Key. It is advised to have an extra Switch Key on hand, as they have a tendency to get lost.

Troubleshooting

This part works with the following brands:
  • Ridgid
This part works with the following products:
  • Table Saw
Part# 089037006705 replaces these:
089037006705,
★

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(7 Reviews)
Click to filter by ratings:
  • 5 stars
    7
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Rigid table saw, model R4510, switch assembly
I received it correctly and delay was Ok
Iglobal - July 18, 2019
Verified Purchase
★★★★★
★★★★★
Quick shipping
You had a switch that interchanged with my original which is no longer available
Guest - November 9, 2019
Verified Purchase
★★★★★
★★★★★
great job
GREAT JOB ALL AROUND Thanks REL
Guest - July 10, 2020
Verified Purchase
★★★★★
★★★★★
Fast delivery - Easy fix
My tablesaw has been giving me issues starting for a while. Was guessing it was the switch so I ordered one from ereplacementparts.com Part was easy to find on their website, price was great, shipping was fast. Easy install my my saw is now working like new! I HIGHLY recommend buying parts from here. A+ is my book. Thanks.
Guest - December 29, 2020
Verified Purchase
★★★★★
★★★★★
replacement part.
Exact fit for a replacement part. Quick service and delivery. Original part broke in the middle of a project. Thank you!
Michael - August 27, 2021
Verified Purchase
★★★★★
★★★★★
Repair Rigid table saw soft start switch
Part arrived in good condition and repair went smoothly. Table saw works well with new switch.
Guest - July 18, 2022
Verified Purchase
★★★★★
★★★★★
Smooth transaction
Easy repair. my bench saw is like new
Iglobal - February 2, 2023
Verified Purchase

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
I purchased this saw a couple of years ago. I don't use it that often. If I could put it so you would understand. I would say, turn the motor on and let it run for about 3 hours total run time. It is in great physical shape. The brushes on the motor are about 3/4" long I could not believe that so much sawdust got in there. Cleaned them out and they move freely in their housings. I cut a 3 foot piece of ply turned it off and when I went back to cut another it did nothing. No smell no sound. I didn't jam the wood. It just didn't turn back on. In your experience what would be the first part that you think should be replaced so I don't purchase the wrong item. Thank you in advance. John.
John For model number 4510 - March 2, 2023

Hi John, Thank you for writing. We suggest testing the Switch with a Multimeter to check the continuity. This is the power switch for the Ridgid Table Saws. We hope this information is useful!

eReplacementParts Team
March 2, 2023

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

15 - 30 mins 

(23 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The ON/OFF switch burned out.

James from Blanco, Texas

21 of 21 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
089037006705
I removed the four screws holdling the switch to the box with the wires and unplugged the four wires from the ear tabs on back of the switch. Then, I re-connected the wires and re-attached the switch to the box. The hardest part of the repair was aligning the holes in the box to the new switch. The box was inside the saw while the switch was on the outside. It was very difficult to hold the box while putting the screws through the switch holes and aligning them with the plate inside the box. The plate inside the box moves around and must be aligned just right to get the screws and there is no way to directly hole the plate while placing the screws and tightening them.
Read less
Did you find this story helpful?
Thank you for voting!

Switch was bad. Saw would not come on.

John from St. Augustine, Florida

6 of 6 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
089037006705
Removed old switch.
Connected wires to new switch.
Attempted to install new switch.
Discovered that screws that hold the switch also hold an electrical box inside saw case. It is nearly impossible to hold box in position inside the case and install new switch. Used switch screws to hold box in place without switch in pl ace. Removed one screw and then put that screw through switch and in place through the case and into electrical box leaving screw very loose. Removed second screw and put screw through switch and case and electrical box. With great difficulty, removed two remaining screws working behind the switch. Finally installed last two screws and tightened all screws.
Read less
Did you find this story helpful?
Thank you for voting!

Brushes and switch

Kennedy from Seaside, California

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
089037006705, 816768
Removed the screws from the switch housing
Removed the terminals one by one from the old switch to the new switch
Screwed the switch housing back on
Removed the brush caps
Removed the old brushes
Installed the new brushes, then the brush caps
Did you find this story helpful?
Thank you for voting!

Burnt switch

Doug from Ekalaka, Montana

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
089037006705
Remove the four screws that secure the switch to the body of the saw. Pull the switch out , but not all the way. Make a wiring diagram of where the wires go on the back of the switch. Remove the wires from the old switch and place them on the new switch according to the wiring diagram. Take the for screws and install the new switch on th e saw.
Read less
Did you find this story helpful?
Thank you for voting!

saw would not start

Danny from Surprise, Arizona

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
089037006705
1. Remove the 4 mounting screws holding the switch assembly to the saw front.
Note which terminals the wires are attach to. Recommend taking a picture of the wires before removing them from the terminals for future reference.
2. You will then discover a metal mounting plate and electrical connection box behind the front of the saw cabinet.
3. Remove the 4 bolts that secure the saw to the mobile base.
4. Lift the saw from mobile base and move to a workbench and lay it on it\'s back. This gives you access to the mounting plate and electrical box mentioned in step 2.
5. After attaching the wires removed in step one to the replacement switch, use an awl, align the mounting holes of the replacement switch one at a time thru the saw base with the mounting plate and electrical connection box and carefully install the screws that were removed in step one.
6. At this time I recommend you set the saw upright and test to make sure it\'s operational.
7. Mount the saw back onto the mobile base making sure that you reattach the ground wire to the mounting bolt it came off of.
Read less
Did you find this story helpful?
Thank you for voting!

Power switch stopped working.

Danial from Batavia, Ohio

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
089037006705
Removed switch, tested circuit, replaced switch. The only issue is that the screws holding the switch plate on the saw are to large and the original screws will not tighten the cover to the saw. I feel the original holes were drilled to large a diameter. I have to get larger size, # 12 or 14 screws. That\'s not a big deal except those size screws commonly come with larger heads that won\'t fit in the molded well around the hole.
Read less
Did you find this story helpful?
Thank you for voting!

switch burnt up

bernard from cape elizabeth, Maine

2 of 2 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
089037006705
reattached 4 wires on new switch align with inside plastic plate 4 holes put one screw in new switch and in plastic plate reach inside plastic and try to align plastic back wiring box good luck try to hold every thing in place while screwing it together good luck after about 20 tries finally got it th e other 3 screws went in fine you really need 2 people to put it together yes it does work
Read less
Did you find this story helpful?
Thank you for voting!

Switch got hot and separated inside

Mike from Evansville, Indiana

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
089037006705
Removed the switch and then did the reverse to replace it. Very easy to do.
Did you find this story helpful?
Thank you for voting!

Switch needed replacement

Doug from Ontario, New York

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
089037006705, 816768
1. Removed four screws from the old switch and removed it
2. Exchanged the wires from the old switch to the new one
2. Installed new switch
3. Brushes were fine, bought new brushes as spares
Did you find this story helpful?
Thank you for voting!

Power switch burned out

Candace from PHILOMATH, Oregon

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
089037006705
1. Removed old actuator assembly
2. Plugged in new one
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP18687285
Manufacturer Part Number: 089037006705
Brand Model Number Description
Ridgid R4517 Table Saw - Table Saw 4-28-18 (Rev:02)
SWITCH ASSEMBLY
$ 40.48
Special Order
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖