Genuine Manufacturer Approved replacement part used on specific Poulan Gas Chainsaws. This item is made out of Metal and it is Sold Individually. This part plays an important role as it provides spring action in the Pull Starter.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Just one of many parts to tune up my chainsaw. They made my life alot easier. Thanks ereplacement parts, you guys rock.
brand new parts fit like a glove.
Guest - August 26, 2020
Verified Purchase
★★★★★
★★★★★
Worked well
The parts were back ordered, but ereplacement parts gave me updates. When I got the notice it was shipped, it didn't take any time to get here. Part worked perfect for my Poland Chainsaw.
Robert - December 10, 2020
Verified Purchase
★★★★★
★★★★★
Poulon recoil starter spring
Website was easy to use and part arrived in 2 days
Guest - January 28, 2021
Verified Purchase
★★★★★
★★★★★
Fast and easy
I got the parts I needed, fast and at a good price to. I will be using them again when I need parts
Guest - May 16, 2021
Verified Purchase
★★★★★
★★★★★
Easy
New again
Iglobal - September 18, 2021
Verified Purchase
★★★★★
★★★★★
Hub Spring Repair
I put the recoil Starter hub spring in and the Chainsaw started right up. I did have a question. I was not sure which end of the spring should go in first. It had a yellow paint on one end. I guess I got it right or it doesn't matter, but I would like to know for sure.
Ralph - January 25, 2022
Verified Purchase
★★★★★
★★★★★
Parts are available
It's great to have a place where the parts are always available. Great service and quick shipping
Charles - May 26, 2022
Verified Purchase
★★★★★
★★★★★
Part fit well, easy repair
The coil spring for my chainsaw came in a timely manner and the repair went smoothly. Thanks.
Guest - February 27, 2023
Verified Purchase
★★★★★
★★★★★
easy to repair fit like a glove
chainsaw up a and running
Guest - May 28, 2019
Verified Purchase
★★★★★
★★★★★
Quick delivery, perfect matchup parts
Perfect fit replacement parts, recoil spring and hub were easy to install and my chainsaw is up and running
Iglobal - June 28, 2019
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I removed 4 screws holding the housing and removed the housing from the saw, then removed the screw holding the old pull start assembly and removed it. I placed the new recoil spring in the housing and then the cord hub, the eps spring and outer retainer that engages the flywheel. I found that the screw holding the assembly to the flywhee
... Read morel was too short. When tightened it would not allow the string to recoil. I put a small washer under the shoulder of the screw which allowed me to tighten the assembly and also allowing the string to recoil. The washer was not included in the kit or mentioned in the instructions, so you have to improvise. I made it by cutting a wire termination end which turned out to be the right size on the inside and outside. I had been dealing with this issue for some time and Poulan customer service gave me no help in resolving it.
Read less
Did you find this story helpful?
Thank you for voting!
It\'s a poor design. The spring is good but don\'t last long.
Rewound coil spring and loaded in plastic housing. Allowed starter string to rewind itself using coil tension. Replaced defective spring and cap that hold starting mechanism together.
Did you find this story helpful?
Thank you for voting!
Original recoil starter hub spring was warped - pull rope wouldn\'t retract
1. removed cover that includes recoil starter hub spring, rope - with flathead screwdriver
2. removed hub with star shaped screwdriver
3. removed original recoil starter hub spring - coils were no longer vertical (above one another)
4. installed new recoil starter hub spring
5. installed hub with star shaped screwd
... Read moreriver
6. installed cover that includes recoil starter hub spring, rope - with flathead screwdriver
7. chainsaw started easily and rope recoiled properly
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18530023
Manufacturer Part Number: 581481601
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Spring or Shock Absorber","title":"Spring or Shock Absorber","url":"/parts/lawn-and-garden/chainsaw/springs-and-shock-absorbers/"},{"position":2,"name":"581481601","title":"581481601","url":""}]
