Part Location Diagram of 532440855 Husqvarna CABLE.BRAKE.LRV
See part C-60 in the diagram
( Grid squares measure 1x1 inch )

CABLE.BRAKE.LRV 532440855

Manufactured by:
Husqvarna
ERP Number:
ERP18523998
Part Number:
532440855
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

1- 2 hours 

(9 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This break cable is an authentic manufacturer approved replacement item. It is specially made for use with lawn mowers/tractors. The purpose of this cable it to allow user to stop and start the unit. You may need a screwdriver and pliers to complete this repair. • First you want to see where the old cable is attached • Just remove the cable end there and install the new one • Now you can run the new cable up to the lever/pedal • Then just as the old cable, secure the other end • Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable

Troubleshooting

This part works with the following brands:
  • Weed Eater
  • Poulan
  • Husqvarna
This part works with the following products:
  • Lawn Tractor
Part# 532440855 replaces these:
532428460, 532435559, 532440855,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(9 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Broken brake cable

Frank from Pinebrook, New Jersey

5 of 5 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
532440855
First, take the steering wheel off, then take the cover off to get to the brake pedal. Next, remove footrest to get to the cable. Squeeze clip to remove the cable put the new cable on. You will need someone to help you to put the cable on the brake end. It\'s a little tricky, you will have to pull the cable while the other person tries to put the clip in place.
Did you find this story helpful?
Thank you for voting!

Cable was stretched

george from Burlington, Washington

5 of 5 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Parts Used:
532440855
Had to disassemble much of the front of the mower to replace the cable. I noted how it was engaged at both ends. Then I was able to install the new cable.
Did you find this story helpful?
Thank you for voting!

Replaced broken brake cable and worn mower belt

Tom from Huntsville, Alabama

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
532440855, 532428578
Place front end on jack. Remove mower belt cover, disconnect and lower blade assembly, remove steering wheel, remove lower steering assembly cover, remove foot rest cover and foot rest assembly.

Route new brake cable assembly. Remove old belt and replace with new belt. To make enough room to remove and route the new belt un der the engine you need to press and hold down the brake release lever at the rear of the mower.

Reassemble all the components that you removed.
Did you find this story helpful?
Thank you for voting!

Brake cable broke.

Joseph from SAINT AUGUSTINE, Florida

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
532440855
Removed and replaced the broken brake cable. The replacement cable fit perfectly.
Did you find this story helpful?
Thank you for voting!

Cable brake got stretched

Robert from Urbana, Ohio

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers
Parts Used:
532440855
We just pull out the old one and routed the new one in place then put the pin and key in the back one then did the same with the other one
Did you find this story helpful?
Thank you for voting!

Lawnmower brake cable broke

Hugh from Scranton, Pennsylvania

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Parts Used:
532440855
Weedeater 26\" riding lawnmower had to take the the front end apart to install the new cable. Routed the cable to the back of the machine to the brake
Did you find this story helpful?
Thank you for voting!

Lawn mower shifter and brake repair.

DAVID from SUFFOLK, Virginia

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
1. Removed back and bottom plates
2. Removed rear right wheel
3. Disconnected the shifter handle and shifter link
4. Remove side plate bolts for unlimited access to brake.
5. Take a snap shot of mounted brake and then remove to make repairs.
6. Lubricate the shifter rod in place so travel left to right will have less resistance.
7. Reassemble and make brake gap setting to 0.02\"
Did you find this story helpful?
Thank you for voting!

Cable broke at the pedal.

Michael from Mattoon, Illinois

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable)
Parts Used:
532440855
All I had to do was remove the front foot rest assembly to get to front cable assembly, put cable back like it came out. Works like normal. Thanks.
Did you find this story helpful?
Thank you for voting!

Broken brake cable

James from Mt Zion , Illinois

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Socket set
Parts Used:
532440855
I looked and took some pictures on how the cable was attached at both ends. By doing this I was able to replace it
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18523998
Manufacturer Part Number: 532440855
Brand Model Number Description
Weed Eater WE261 Lawn Tractor - Lawn Tractor
Poulan WELRV1 Lawn Mower - Riding Mower