This is an authentic Poulan replacement chain designed for use with chainsaws. It is a key component of a chainsaw which mechanically cuts the material. Over time the chain will stretch, become dull or break. Keep an eye on the condition of the chain and replace as needed. Please note this chain is only for use with 16" bars. Includes one (1) metal cutting chain per order. The only tool needed for this repair is the scwrench that most likely came with your chainsaw. Otherwise, a flat head screwdriver and a socket wrench will do just fine. • Remove the guide bar side panel • Release the chain tension • Remove the old chain • Loosen the tension screw • Thread the new chain onto the saw • Align the guide bar • Replace the side plate • Tighten the chain to the correct tension • Finish tightening the side plate nuts
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
OEM replacement chainsaw chain
Exactly what I ordered much cheaper than high street stores. Only complaint was not with the product but with USPS. The product sat in one of their facilities for two days so that it could be delivered on the date specified. Not complaining as the item was delivered when promised but felt the Post Office could have exceeded expectations rather than meeting expectations.
Guest - April 22, 2019
Verified Purchase
★★★★★
★★★★★
replaced chainsaw blade
the part was an exact fit, no issues and fast shipping. happy satisfied customer. I will recommend eReplacementparts to friends and family !! thank you sincerely , William Gaboury
Guest - August 5, 2019
Verified Purchase
★★★★★
★★★★★
Replacement saw blade
This came very quickly and the price was very affordable
Guest - May 12, 2020
Verified Purchase
★★★★★
★★★★★
Great part
Could not find a chain that fit in the stores until I found one with you.
Guest - June 5, 2020
Verified Purchase
★★★★★
★★★★★
Perfect fit. Easy repair
Thank you. My gas cap on my chainsaw was almost impossible to turn. The new one fits beautifully and makes life a lot easier.
Guest - August 20, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Loosened the chain tension
Remove the chain brake
Removed the old chain and installed the new chain
Attached the chain brake
Adjusted the chain to the correct tension
1. Removed old dried fuel parts and replaced with new ones.
2. Replaced worm chain with new one.
3. Parts were all correct due to the effective web sight.
Remove cover, remove chain, remove clip holding clutch drum, remove and replace drum, replace clip, replace chain replace cover.
I put on a new chain. My old chain was worn and stretched so future adjustment was very limited.
Did you find this story helpful?
Thank you for voting!
Fiberglass gear was being destroyed by motor gear.
Removed chain housing cover of chain bar - two nuts
removed locking clip from chain gear
removed chain gear
removed all screws holding case together
removed broken gear
removed damaged oil line and outlet
cleaned shredded fiberglass particles from both sides of case
installed new oil line
in
... Read morestalled new gear
replaced case sides and oil outlet
installed all screws
installed chain gear
replaced locking clip
installed chain bar and new chain
replaced chain cover - two nuts
adjusted chain bar
Loosened the tension on the bar and chain
Removed the old clutch cover
Removed the bar and chain
Removed the e-ring and the washer
Removed the clutch and small washer
Install the new parts in reverse order
1. Removed housing enclosure, 2 bolts
2. Loosened chain rail/extension
3. Removed chain
4. Put new chain on rail/extension
5. Make sure chain is on engine gear sprocket
6. Replace housing enclosure, make sure it stays on the gear sprocket
7. Use screwdriver to extend rail/extension to tighten chain
Remove the tension from the chain
Remove the chain brake
Remove the old chain from the bar and sprocket
Install the new chain on the sprocket and the bar
Install the chain brake
Adjust the tension to the chain and bar
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP16371758
Manufacturer Part Number: 581562201
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
