This is a genuine OEM replacement part, it is sold individually. The purpose of this part is to connect the fuel line extending from the fuel tank to the fuel line that connects to the carburetor. Over time the fuel lines will become brittle and oversized. They will have to be replaced. This would be a good time to replace the Fuel Fitting also.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Parts worked just fine for me
The parts worked as planned and now I have no fuels leaks.
William - January 3, 2020
Verified Purchase
★★★★★
★★★★★
Just what i needed
Parts were nice replacement parts with an exact fit. Thanks alot Joe
Guest - August 10, 2021
Verified Purchase
★★★★★
★★★★★
Great part
This is the correct part I needed.
Guest - September 15, 2020
Verified Purchase
★★★★★
★★★★★
fairly easy repair.
Great condition, decent fit. Some difficulty in mating it to the other parts (rubber hoses). Very tight fit, challenging to get hoses fully attached past the knuckles.
Guest - November 22, 2019
Verified Purchase
★★★★★
★★★★★
Good part but shipping takes too long.
See above !!
Guest - September 30, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove air filter housing
Remove both lines between fuel tank and carb
Use a wire hook to fish filter and line out of fuel tank
Feed new line into fuel tank far enough to fish line out and attach new filter
Attach line to carb
Attach new return line from carburetor and insert in tank.
Add fuel and start
... Read more engine
If engine won\'t run reverse lines at carb.
1. Drained fuel tank.
2. Removed screws from blower shroud.
3. Removed screws from crankcase cover.
4. Placed rag into crankcase opening to eliminate debris falling into the motor.
5. Removed old crankcase gasket and removed gasket reside with a sharpened putty knife.
6. Disconnected existing fuel lines and r
... Read moreemoved old fuel tank.
7. Attached new fuel lines and installed new rubber bumpers.
8. Seated new fuel tank.
9. Installed new crankcase gasket and removed rag from Step 4.
10. Reattached crankcase cover.
11. Reattached blower shroud.
removed the jury riggin to finish what i started. moved the gray hose back into place. measured & replaced the new fuel line & fittin.
Replaced the air filter while i was there. filled tank, primed & we\'re back in business. hopefully for another 8 to 10 years.
thank ya\'ll
Did you find this story helpful?
Thank you for voting!
Rubber tubing had worn out into the plastic fuel tank which started a fuel leak.
Removed cover
Removed plastic fuel tank
Disconnected the rubber hoses
Determined the length they send of the rubber hose makes it impossible to reconnect with the fuel filter inside the fuel tank as its way down in their far from the filler neck.
Had to go buy longer rubber tubing from hardware store and then was
... Read moreable to complete the repair.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP12694017
Manufacturer Part Number: 985304001
Leaf Blower / Vacuum
- Homelite Leaf Blower Model HB25255V Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 985304001 Homelite Inline Fuel Fitting")
_WW_1.gif "Part Location Diagram of 985304001 Homelite Inline Fuel Fitting")
