- This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
- New stock is on the way! On order parts usually ship within 7 business days.
- Item is not in stock and usually ships 10-15 business days from the time you place your order.
- This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Carburetor 545081831
- Manufactured by:
- Husqvarna
- ERP Number:
- ERP12644556
- Part Number:
- 545081831
Does this part fit my model?
Need help finding your model number?Jump to:
Product Description
?This is a genuine OEM replacement part, it is sold individually. It is used on a variety of Gas Powered Equipment. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won't start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem.
Frequently Purchased Together
?Troubleshooting
- Weed Eater
- Poulan
- Husqvarna
- Leaf Blower / Vacuum
Customer Part Reviews
?- < Prev
- 1
- Next >
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- 2
- Next >
Hard to start. When it would start, would not take gas.
Mike from Florence, South Carolina
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Parts Used:
- 545081831
Primed bulb 6 times, full choke and fired on first pull. Half choke, cranked and ran. Let warm up for about a minute and placed in run. Ran like a new blower.
... Read more
P.S. Have used ereplacement parts for several years with great service.
Thanks, Mike
Blower was about 8 years old and did not run smooth. I contribute it to the alcohol gas over the years. Remove and replace carburetor.
William from Winchester, Virginia
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
- Parts Used:
- 545081831
Remove dust cover.
Remove foam air filter
Remove two screws
Remove the two plastic fuel lines
Remove carburetor from throttle rod by turning carburetor
Wipe off fuel and grease from base where carburetor mounts
Replace ca ... Read more rburetor onto throttle rod by turning carburetor
Replace the two plastic fuel lines
Replace two screws and snug tight
Replace foam air filter
Replace dust cover
Pump fuel into carburetor and start the engine
The carburetor was malfunctioning...should not have used gasoline containing ethanol...particularly letting it set over winter, etc. Rather than risk damaging the carburetor by cleaning it and replac
Stephen from Harrisonburg, Virginia
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Wrench set
- Parts Used:
- 545081831
Removed the air filter to expose the two bolts.
Used an allen wrench to loosen the bolts holding the carburetor in place.
Removed the two gas lines from the carburetor that extend to the gas tank.
Installed the new carburetor by attaching the gas lin ... Read more es and fastening the bolts.
Replaced the air filter and cover.
Filled the gas tank with non-ethanol gasoline.
The Poulan Gas Blower started and is working normally.
Engine lacked power and would only stay running at 1/2 choke and only for a short time
Roger from Pulaski, New York
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
removed torx screws with torx screwdriver.
removed fuel lines with fingers.
removed throttle linkage with hands,
remove carburetor.
reverse procedure.
misdiagnoised, needed to replace partially sheared woodriff key in the flywheel. Now runs great
Blower wouldn\'t start. Fuel not reaching cylinder. Replace carb. was an easy and least expensive fix.
Calvin from Spring Hill, Florida
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
- Parts Used:
- 545081831
No fuel to carburetor.
dan from breese, Illinois
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
- Parts Used:
- 545081831
Blower would not start
Robert from Tulare, California
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
- Parts Used:
- 545081831
Disconnected the fuel lines and the throttle from the carburetor
Removed the old carburetor
Installed the new carburetor
Connected the fuel lines and throttle
Installed the air cleaner assembly
Would not run
Victor from Mt Sinai , New York
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Parts Used:
- 545081831
Remove the fuel lines and throttle from the carburetor
Remove the nuts holding the carburetor on and remove the old carburetor
Install the new carburetor and tighten the nuts
Replace the throttle and fuel lines
Replace the air cleaner assembly
Gas lines gone and carb bad.
Gary from Lake Alfred, Florida
Blower would not stay running
Michael from Maple Valley, Washington
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
- Parts Used:
- 545081831
2. Removed air filter housing
3. Removed and replaced carb
Easy fix! Thanks!
- < Prev
- 1
- 2
- Next >
Model Cross Reference
Manufacturer Part Number: 545081831
| Brand | Model Number | Description |
|---|---|---|
| Poulan | BVM200VS | Leaf Blower / Vacuum - Gas Blower |
| Poulan | PPB430VS | Leaf Blower / Vacuum - Pro Leaf Blower |
| Weed Eater | VS2000 | Leaf Blower / Vacuum - Weed Eater Leaf Blower Model VS2000 Parts |
| Weed Eater | VS2000BV | Leaf Blower / Vacuum - Handheld Blower |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.