This is an authentic replacement pin which is sourced from the original equipment manufacturer for use with Bostitch nailers and staplers. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality spiral pin is made of durable metal and is sold individually.
1. Removed trigger valve assembly by connecting air hose to roofing nailer,,,the pins were missing so valve assembly popped right off
2. Lubed new trigger valve assembly with air tool grease and inserted valve in body,noting that the grooves on trigger valve assembly lined up with pins that hold it in
3. Using the roll pin pun
... Read morech of correct diameter,drove the pins in that hold the valve assembly and the trigger
4. Remove firing valve and removed the driver, cleaned cylinder, cleaned driver and installed new o ring on driver piston
5.Installed new cap gasket/seal and torqued the four cap screws,,,
6. Loaded nails in roofing nailer and tested it on piece of 2X4,,worked perfect,,very important to install the driver in correct position,,,failure to do so could break the hardened steel driver
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
