This genuine OEM supplied part is specially made for use with Hoover vacuums. The purpose of the belt is to drive the brush roller assembly. It is installed on the shaft of the motor and on the end of the brush roller. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. Please make sure to check the owners manual and the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality belt is made of durable rubber and is sold individually. NOTE: We do have an article and a video on how to install this belt. Here is the link to it. <u><a href="http://www.ereplacementparts.com/article/4999/How_to_Replace_a_Vacuum_Belt.html">How to Replace a Vacuum Belt </u></a>
Troubleshooting
This part works with the following brands:
Hoover
This part works with the following products:
Upright Vacuum
★
Customer Part Reviews
?
4.9
Average Rating (out of 5):
★★★★★
★★★★★
(14 Reviews)
Click to filter by ratings:
5 stars
12
4 stars
2
3 stars
0
2 stars
0
1 star
0
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Vacuum cleaner belt.
The vacuum cleaner belt was the right fit, it arrived promptly. Thank you. Looking 4ward to doing business in the
future.
Roque - October 4, 2019
Verified Purchase
★★★★★
★★★★★
Easy Repair
The belt fit perfectly and we are vacuumning agsain
Salva - December 3, 2019
Verified Purchase
★★★★★
★★★★★
The right part
Easy to order and received the correct part quickly
Guest - March 30, 2021
Verified Purchase
★★★★★
★★★★★
Correct
The parts I ordered were correct one and shipped fast
Guest - June 5, 2021
Verified Purchase
★★★★★
★★★★★
Exactly what I needed
Part was perfect, arrived timely and fit perfectly
Guest - January 18, 2023
Verified Purchase
★★★★★
★★★★★
QuicknEasy
Finding the right part on their website took less than a minute; ordering and receiving confirmation and final delivery was done in a snap. I’m very pleased with the overall shopping experience!
Iglobal - May 19, 2023
Verified Purchase
★★★★★
★★★★★
Excellent! WOrked like a Charm.... A+
It worked perfectly.....The vaccum worked like new..... Keep up the good work!! Thanks
Iglobal - July 10, 2023
Verified Purchase
★★★★★
★★★★★
Great service fast shipping
Belt was as described fast shipping
Guest - July 14, 2023
Verified Purchase
★★★★★
★★★★★
Excellent service
Was able to find and order the part I needed easily, received it in a few days, very happy with purchase. Would recommend their service to anyone.
Guest - September 25, 2023
Verified Purchase
★★★★★
★★★★★
Perfect fit
I always have a good experience with e-replacement parts.
Guest - March 14, 2024
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove cover
Clean dust that built up
Place belt on spindle
Place belt on roller brush
Stretch belt enough to place roller back in position
Reattach cover
Did you find this story helpful?
Thank you for voting!
Brush roll clogged with hair and wouldn\'t spin causing motor shaft to burn belt.
1. Removed suction hose mounting bracket. Two screws, located where the bottom of the hose connects.
2. Removed top cover. Four screws located on the top of plastic body where logo and height adjustment knobs are, respectively.
3. Removed top cover. Apply gentle rocking pressure to remove cover from rubber gasket. (Looks like
... Read morea bumper.)
4. With cover off, brush roll and belt are exposed. Remove belt from motor shaft and brush roll from end brackets.
5. Slide new belt onto new brush roll. The correct side has about 1.5 inches of bare plastic with no bristles.
6. With belt on brush roll, hook belt onto motor shaft.
7. Pull brush roll forward and lock into end brackets.
Note: there should be tension on the belt and you should feel a good bit of resistance when pulling forward. The end brackets are built into the body of machine and are hexagonal. Rotate brush roll until it literally snaps into place.
8. Turn on vacuum briefly to verify brush roll spins and belt doesn\'t bind up.
9. Reinstall top cover.
10. Reinstall hose bracket.
1. Remove bottom plate of vacuum.
2. Removed old broken belt.
3. Installed new belt over the motor shaft and brush-roller.
4. Replace bottom plate of vacuum.
Laid vacuum on back side.
Turned and slid 2 retainer clips and removed a few of the phillips screws to gain access to belt and spool ends.
I pushed belt off shaft, lifted out spool assembly.
Placed new belt on spool, engaged belt on motor shaft, then forced the two square ends of spool into their slots.
Replace
... Read mored screws, slid and turned two retainer clips to lock assembly in.
Done.
Removed the outer cover and all inside parts at the bottom of the vacuum.
Followed written directions that came with new belts.
Replaced belt without too much trouble.
Closed up the bottom but then realized I had left out the piece below the roller and had to remove the bottom, loft out the roller with attached new be
... Read morelt.
Put the piece that belonged below the roller in place.
Replaced the roller and new belt and closed up again. It would help to have diagrams of the parts along with the explanation of how to repair.
Good belt with enough give to make it attach relatively easily. Very pleased that vacuum now works well again.
1. Removed screws holding cover plate over drive belt.
2. Lifted up roller and removed belt.
3. Reinstalled new belt over drive motor spindle and roller brush.
4. Stretched belt and placed roller back in guides.
5. Reinstalled roller cover and inserted and tightened screws.
1. Opened filter door removed and
... Read morereplaced filter snd closed access door.
Removed the 4 screws of the base
Removed the plate cover
Removed the roller brush
Removed the belt
Removed the duct tray beneath the roller
Reinstalled in reverse order
Ordered extra pulley seals because I didnÆt know if they came in the roller tray assembly. They did so I have some for the fu
... Read moreture.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP12068781
Manufacturer Part Number: H-AH20080
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
