Part Location Diagram of H-AH20065 Hoover Flat Cloth Belt Set
See part 36A in the diagram
( Grid squares measure 1x1 inch )

Flat Cloth Belt Set H-AH20065

Manufactured by:
Hoover
ERP Number:
ERP12068779
Part Number:
H-AH20065
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(9 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

These are a genuine replacement belts designed for Hoover upright vacuums. These are main belts that driver the brushroller. It is recommended to replace these belts every 6 months to ensure optimum performance. This pack includes two (2) rubber belts. To replace this item you would need a screwdriver. • Access the vacuum belt and brushroll area • Remove the brush roller and the old belt • Install the new vacuum belt on the motor shaft and brush roller • Install the brush roller with the belt correctly positioned on it • Reassemble the vacuum

Troubleshooting

This part works with the following brands:
  • Hoover
This part works with the following products:
  • Upright Vacuum

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
The old belt was slipping. I replaced it with a new Hoover belt. part # 562289001/ Style 65. This belt is slipping also and does not seem to be as tight as it should. Are there different lengths of this belt?
David For model number UH71251/ Series YW12.0 - March 28, 2023

Hi David, Thank you for your question. There is both a flat non-stretch belt, part number H-562289001, and a set flat cloth belts, part number H-AH20065, listed for your vacuum. If you would like to place an order for one of these products, please call our customer service line and anyone will be happy to assist you. We have included a link to one of our YouTube videos that you may reference on how to install a belt onto a vacuum, https://www.youtube.com/watch?v=T11KkkFspos. The vacuum in the video may appear different from yours, but it will give you a general idea on how to install the part. We hope this helps with the repair!

eReplacementParts Team
March 28, 2023

Did this question help you?
Thank you for voting!
belt for turbo windtunnel model UH71214
Lawrence For model number UH71214 - November 18, 2022

Hi Lawrence, Thank you for your question. The part number listed under your model number for the belt is H-562289001. There is also a belt set listed for your vacuum. The part number listed for it is H-AH20065. If you need help placing an order for them, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

eReplacementParts Team
November 18, 2022

Did this question help you?
Thank you for voting!
Every time I order a belt for this vacation it's too big. I just ordered one from you and it's too big. I need a slightly smaller belt. Is there a number for a smaller belt?
Lonnie For model number Uh71250 - January 3, 2023

Hello Lonnie, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: H-562289001 for the Flat Non-Stretch Belt and Part Number: H-AH20065 for the Flat Cloth Belt Set. We hope this helps!

eReplacementParts Team
January 3, 2023

Did this question help you?
Thank you for voting!
Which belts due I need to order for this model?
Mike For model number UH 71250 - December 23, 2022

Hi Mike, Thank you for your question. There is a flat non-stretch belt, part number H-562289001, and a set of flat cloth belts, part number H-AH20065, listed for your vacuum. If you need help placing an order for these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

eReplacementParts Team
December 23, 2022

Did this question help you?
Thank you for voting!
whats the hoover part number for the belt?
Richard For model number UH70600 - February 8, 2023

Hi Richard, Thank you for your question. The part number listed under your model number for the flat non-stretch belt is H-562289001. The part number listed for the flat cloth belt set is H-AH20065. If you would like to place an order for these parts, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!

eReplacementParts Team
February 8, 2023

Did this question help you?
Thank you for voting!
What is the difference between a non-stretch belt and flat cloth belt. Which do you recommend?
Wanda For model number UH71250 - January 15, 2024

Hello Wanda, Thank you for your inquiry. Both are rubber belts, but the non-stretch belt is sold individually and the flat cloth belt set is sold as a pair. We hope this helps.

eReplacementParts Team
January 15, 2024

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(9 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Broken belt

Steve from Fresh Meadows, New York

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
H-AH20065
Opened the vacuum and replaced the belt. Closed vacuum and it was fixed!
Did you find this story helpful?
Thank you for voting!

Burned motor

David from CHESHIRE, Connecticut

1 person found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Parts Used:
H-AH20065, H-440004104
Disassemble handle from the base. Remove motor from casing and replace. Assemble vacuum and check operation.

Special note: This is not an easy repair. You must have knowledge of electrical circuits. Always follow indicated safety instructions.
Did you find this story helpful?
Thank you for voting!

The roller belt broke.

Robert from PLUMMER, Minnesota

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
H-AH20065
First I removed the underside panel of the vacuum to access the broken belt. Second I removed the roller and the broken belt, then I cleaned the roller, placed the new belt onto the roller and put the roller back. Finally I reinstalled the underside panel. All done.
Did you find this story helpful?
Thank you for voting!

New parts.

samuel from Pittsburgh, Pennsylvania

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Reassembled vac housings for brush and belts. Parts sent fit perfectly for the make-áand model parts weren\'t available locally and the vendor kept us updated on delivery and for part of the order a back order status. Thank you!
Did you find this story helpful?
Thank you for voting!

Vacuum belt broke

kenneth from orangevale, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
H-AH20065
I removed the belt housing and replaced belt. Belt was very hard to find. Vacuum is new however the belt should be available. I ordered 4 belts hoping to never buy any for a while.
Did you find this story helpful?
Thank you for voting!

Vacuum cleaner belt broke

Peter from San Diego, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
H-AH20065
Removed plastic frame, replaced belt, reattached plastic frame
Did you find this story helpful?
Thank you for voting!

Belt was slipping

Michael from Wiscasset, Maine

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
H-AH20065
Took bottom panel off pulled roller out. Removed old belt. Replaced with new one I got from ereplacementparts.Com. Best place to get parts for a wide variety of things. I always tell people of my parts I\'ve got over the years. Thank you
Did you find this story helpful?
Thank you for voting!

Vacuum needed another belt

Fred from BROOKPARK, Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
H-AH20065
Opened the part of the vacuum where the belt was and replaced it, then reversed what I did
Did you find this story helpful?
Thank you for voting!

Just ran out of belts. wanted more on hand for when Ineed one.

Rex from Burns, Oregon

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
H-AH20065
Take marked screws ot for bet replacement, remove old and put in new. No brainer even for the mechaniciy challenged. Don\'t over tighten screws as their going in plastic.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP12068779
Manufacturer Part Number: H-AH20065
Brand Model Number Description
Hoover UH30300 Upright Vacuum - WindTunnel Bagged Upright
Hoover UH30302 Upright Vacuum - WindTunnel T Series
Hoover UH30308 Upright Vacuum - WindTunnel T Series
Hoover UH30310 Upright Vacuum - WindTunnel Pet Bagged Upright Vacuum
Hoover UH70130 Upright Vacuum - WindTunnel Series Rewind Vacuum
Hoover UH70140 Upright Vacuum - WindTunnel Rewind Plus Bagless Upright
Hoover UH70200 Upright Vacuum - WindTunnel Series Vacuum
Hoover UH70202 Upright Vacuum - WindTunnel Upright Vacuum
Hoover UH70205 Upright Vacuum - WindTunnel Series Vacuum
Hoover UH70210 Upright Vacuum - WindTunnel Series Vacuum
Hoover UH70211 Upright Vacuum - WindTunnel Series Vacuum
Hoover UH70212 Upright Vacuum - WindTunnel Series Vacuum
Hoover UH70215 Upright Vacuum - WindTunnel Series Vacuum
Hoover UH70240 Upright Vacuum - WindTunnel Rewind Plus
Hoover UH70600 Upright Vacuum - Windtunnel Max Multi-Cyclonic Bagless Upright Vacuum
Hoover UH70601 Upright Vacuum - WindTunnel Max Upright Vacuum
Hoover UH70603 Upright Vacuum - WindTunnel Max Upright Vacuum
Hoover UH70604 Upright Vacuum - Remedy Multi-Cyclonic Bagless Upright Vacuum
Hoover UH70605 Upright Vacuum - WindTunnel Max Upright Vacuum
Hoover UH70607 Upright Vacuum - WindTunnel Air, T Series
Hoover UH70608 Upright Vacuum - WindTunnel Max Pet Plus
Hoover UH70700 Upright Vacuum - WindTunnel Max Pet Plus
Hoover UH70930 Upright Vacuum - WindTunnel 3 Pro Pet Bagless Upright
Hoover UH71209 Upright Vacuum - Whole House Cleaner
Hoover UH72600 Upright Vacuum - WindTunnel