This is a OEM replacement part sourced from the original manufacturer for use with the barista express made by Breville. This washer is made of durable material and sold individually. The user will need to replace this washer if it is missing. It is recommended to review your models diagram to verify the parts compatibility.
1. Removed hopper
2. Vacuumed out grinder assembly
3. Unlocked and removed outer grinder
4. Removed cap nut that\'s holding inner grinder, then removed inner grinder
5. Removed washers
6. Removed grind fan assembly
7. Replaced felt washer
8. Inserted grind fan assembly
9. Put replacement was
... Read morehers back in place
10. Put cap nut back in place and tightened nut
11. Put replacement outer grinder back in place and locked it in place
12. Checked distance between outer and inner grinder, factory setting of 5 was adequate (minimal to none metal grinding noticable
13. Put bean hopper back in place
14. Adjusted grind of beans
15. Adjusted setting for amount of coffee ground
-> now the setting is a little below 1/4 - >-> like new!
Read less
Did you find this story helpful?
Thank you for voting!
While cleaning the grinder for the first time I did not realize that there were small parts below the hollowed grind fan part of the system & accidentally sucked them up with my vac.
1. Again removed the grinder hopper
2. Vac.\'d out & fully cleaned burr
3. Unscrewed all parts as previously done.
4.Finished cleaning again.
5. Replaced missing parts as indicated in your drawings
6. Reassembled unit.
7. First test of repair proved REPAIR & PARTS WORKED PERFECTL
... Read moreY.
I could not have done, or even found the right parts, without your great drawings. You have my undying thanks for that.
I was very happy with your service and should the need arise I will do so again.
Read less
Did you find this story helpful?
Thank you for voting!
The felt washer came apart as I was taking apart the conical burr grinder to clean it.
I inserted the felt washer first then the grind fan. After this, I inserted the lower burr, the flat washer and spring washer. The nut was tightened. The burr was tested and the coffee beans were a perfect clean grind for a tasty double shot expresso. Than you!
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
