This is a genuine Breville replacement felt washer which is supplied directly from original equipment manufacturer. It is specially designed for a espresso machine. Washer helps to distribute the pressure evenly over the surface of connected parts. It is made out of felt material and it is sold individually.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Needed part just right.
The only place I can find this part is with you. The original has the fit.
Nancy - September 30, 2022
Verified Purchase
★★★★★
★★★★★
easy to use and find part on this website.
Fast effective and efficient! Delivery cost outrageous and long. Other than that the part is as was shown on site, so because of the delivery very high charges this will be a last restore source i will use for my needs. God bless and my his peace and grace follow you always. BCH Sisk
Guest - November 15, 2022
Verified Purchase
★★★★★
★★★★★
Perfect Replacements
Perfect OEM factory part. Good price.
Guest - August 23, 2024
Verified Purchase
★★★★★
★★★★★
Fits Breville Smart Grinder Pro
Perfect fit, goes in the shaft under the impeller.
JOHN - August 29, 2019
Verified Purchase
★★★★★
★★★★★
Washer for espresso machine
Arrived quickly thanks again.
Rafael - December 27, 2019
Verified Purchase
★★★★★
★★★★★
Hard part to find but these guys had it!
Easy and on time. A Pleasure.
Guest - February 14, 2020
Verified Purchase
★★★★★
★★★★★
I finally got it
It took awhile but I finally got the part I needed. Ersplacements sent me emails to let me know the progress of my order. I appreciate that.
Guest - August 11, 2021
Verified Purchase
★★★★★
★★★★★
The right part for my machine
Factory replacement part worked great. My only complaint would be the slow response that erplacementparts provided. I have ordered from them in the past and still like their selection of parts but sometimes the service is slow.
Benjamin - December 6, 2021
Verified Purchase
★★★★★
★★★★★
Easy repair
I needed this washer because I clean the grind assembly and the washer has to be changed. The felt is always ruined.
Guest - January 29, 2022
Verified Purchase
★★★★★
★★★★★
Perfect fit
I had my coffee machine ready for the installation, took me 5 minutes to make my first espresso coffee. Thanks
Guest - August 21, 2022
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
This grinder will jam if the coffee discharge chute is blocked - it was because someone put the grind jar in backwards... The felt washer under the impeller is very fragile and broke when cleaning out the discharge chute. This felt washer is not available on the Breville web site. eReplacementParts.com showed a similar washer SP0001575 bu
... Read moret for a different Breville coffee grinder/brewer. I took a chance that it would fit assuming that Breville does not make many of these grinders. it fit just fine! BTW - I bought 2 just in case it happens again.
Read less
Did you find this story helpful?
Thank you for voting!
Setting for amount of coffee ground needed to be close to maximum
1. Removed hopper
2. Vacuumed out grinder assembly
3. Unlocked and removed outer grinder
4. Removed cap nut that\'s holding inner grinder, then removed inner grinder
5. Removed washers
6. Removed grind fan assembly
7. Replaced felt washer
8. Inserted grind fan assembly
9. Put replacement was
... Read morehers back in place
10. Put cap nut back in place and tightened nut
11. Put replacement outer grinder back in place and locked it in place
12. Checked distance between outer and inner grinder, factory setting of 5 was adequate (minimal to none metal grinding noticable
13. Put bean hopper back in place
14. Adjusted grind of beans
15. Adjusted setting for amount of coffee ground
-> now the setting is a little below 1/4 - >-> like new!
Read less
Did you find this story helpful?
Thank you for voting!
Coffee grinder on espresso machine wouldnÆt work and made loud screeching noises.
Took grinder apart
Washer was broken, so ordered another.
Replaced washer, cleaned grinder.
Removed small pebble that was about the size of one-half coffee bean.
Put machine back together and enjoyed a latte.
1. Dismantled coffee grinder according to manufacturer\'s instructions
2. Removed old felt washer
3. Put in new felt washer
4. Re-assembled coffee grinder according to manual
Did you find this story helpful?
Thank you for voting!
While cleaning the grinder for the first time I did not realize that there were small parts below the hollowed grind fan part of the system & accidentally sucked them up with my vac.
1. Again removed the grinder hopper
2. Vac.\'d out & fully cleaned burr
3. Unscrewed all parts as previously done.
4.Finished cleaning again.
5. Replaced missing parts as indicated in your drawings
6. Reassembled unit.
7. First test of repair proved REPAIR & PARTS WORKED PERFECTL
... Read moreY.
I could not have done, or even found the right parts, without your great drawings. You have my undying thanks for that.
I was very happy with your service and should the need arise I will do so again.
Read less
Did you find this story helpful?
Thank you for voting!
When cleaning, I found the ruined felt washer under the grind fan.
1. I removed the nut, the washers and the inner burr.
2. After, the grind fan was removed.
3. The felt washer was taken out and replaced with the new washer.
4. The grind fan was replaced, then the inner burr, the spring and flat washers, and last, the nut.
5. An expresso was prepared to test the coffee grinder. It
... Read more passed the test.
1.Removed the top nut.
2. Removed the washers and outer burr.
3. Removed the inner burr and felt washer.
4 After cleaning all, put in new felt washer and all the parts in place.
5. Test the grinding of coffee and drink a well deserved expresso.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
