This is a genuine Dewalt replacement part, it is sold individually. The purpose of the 372105-01 Blade, is to plane wood material and leave a smooth finish. There are two blades requires on each of the tools listed below. This Blade is reversible. To remove the blade ,loosen the bolts that secure the blades. Use a screwdriver to begin sliding the blade out, then you can carefully remove it with your fingers. Turn the blade around and insert back into the holder, making sure it is centered and not touching either side of the planer, fasten the bolts tight now. Rotate the drum and repeat the process again.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Exact replacemaet
The carbide blades fit perfectly and now my planer is back in operation.
Guest - December 17, 2019
Verified Purchase
★★★★★
★★★★★
Sorry I have not used this item yet.
Impressed with the service though.
Mark - May 4, 2020
Verified Purchase
★★★★★
★★★★★
Carbide tipped blades
Arrived quickly, well made, fit my tool perfectly.
Guest - December 15, 2020
Verified Purchase
★★★★★
★★★★★
Shipping a problem
Ordered the blades but USPS never delivered them. When I called ereplacementsparts for help in finding them, they immediately offered a refund and put in a new order. They shipped them FedEx this time. Customer service rep was extremely helpful and courtesy. Was very happy with the service and am now waiting on new order which should arrive soon. I don't blame ereplacements for USPS inability to deliver, and I am extremely happy with how they resolve the problem.
Tina - May 25, 2021
Verified Purchase
★★★★★
★★★★★
Replacement blades for older power plane
Blades came on time. Fit perfect and work great.
Guest - July 22, 2023
Verified Purchase
★★★★★
★★★★★
Great exact replacement
These blades are exactly the same as the originals, just install and adjust and you're set to go........
Guest - January 17, 2025
Verified Purchase
★★★★★
★★★★★
Easy repair! Great service! Thanks!!
It was so easy to get repair parts and fix my planer I want to start repairing all my broken tools! Thanks for your help!!
Guest - July 1, 2019
Verified Purchase
★★★★★
★★★★★
As expected
The planer blade was as expected however, they should come in sets as most other blades.
Guest - November 7, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Loosen the the three nuts on the blade clamp assembly.
Carefully remove the blade from the cutterhead.
Install the new blade in the same place on the cutterhead.
Hold the blade down as you tighten the nuts on the cutterhead.
Repeat for the other side.
1. Removed screws on the cover plate.
2. Loosened three screws on the cover plate that holds the blades.
3. Inserted the new blades and tightened screws back after making sure of correct alignment.
4. Reinstalled the cover plate with screws.
1. Removed retainer plate by removing 3 screws
2 removed 2 screws from hold down plate
3. Removed old blades
4. Replaced hold down plate, aligned blades, replaced screws
5. Replaced retainer plate and tightened screws
6. Repeated process for 2nd blade
Blades are removed from bottom couple screws
Belt take off the side cover sloped off the old belt sloped the new on replaced the cover and everything works great
Did you find this story helpful?
Thank you for voting!
Planer picked up some soft wood and it broke a blade, bent a blade support and broke the belt.
1) Removed the blade holders, blade retainers and blades,
2) Since I could no longer buy the blades and retainers separately, I bought a complete cutter head assembly. It was easier to swap out the blades, holders and retainers rather than remove the old cutter head to replace the whole assembly,
3) remove blades and retainers
... Read more and holders from the new cutter assemble and replace them on the in-place cutter head,
4) The only tricky bit is to make sure both blades are set at the same height before you tighten down on the Blade Retainers and Blade Holders.
5) To replace the belt; remove the cover,
5) Remove the belt retainer disk from the driven pulley and replace the belt then the retainer disc,
6) Close up, \"smoke test\" and you are done.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP11925467
Manufacturer Part Number: 273794
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
