Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
worked as expected
Correct part received as expected, my compressor, starts up quickly
Guest - November 8, 2019
Verified Purchase
★★★★★
★★★★★
Brand new in original package!
Thank you for your good service and replacement parts.
Guest - April 6, 2020
Verified Purchase
★★★★★
★★★★★
Easy to find parts and return if not needed
I accidentally ordered the wrong parts, I needed parts for a version 9777-4 generator but I ordered parts for a 9777-1 generator. Wouldn't think they would be that different but they are not inter-changable. Easy return process, all on line, didn't have to talk to anyone or explain the problem.
Guest - October 22, 2020
Verified Purchase
★★★★★
★★★★★
Easy and quick replacement .
The fuel shutoff valve was for a different brand of generator but the valve looked identical to the one I needed to replaced . Pictures helped , thanks for Your Service and I'm looking forward to things getting back to normal .
Jerry - October 15, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair, exact replacement.
Exact replacement part.
Guest - September 12, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Simple job. Removed fuel cut off valve and bushing after completely emptying the gas from the tank. Inserted new bushing into tank and pressed the new cut off valve into the bushing. Installed fuel line to the valve. Installed securing clip with a pair of pliers. Can\'t beat the price.
Did you find this story helpful?
Thank you for voting!
The bushing was old and had cracked and the valve was old and hard to turn.
The bushing and valve assembly seemed to be a little too large to assemble in the existing tank hole. After damaging one bushing trying to install even using some lubricant, I ordered another bushing and drilled the tank hole out just a small amount and then the unit went together fine. Still a very tight fit. I then installed the valve
... Read moreand the fuel line.
Drained the fuel from the tank
Removed the fuel line from the valve
Removed the old valve and the old tank bushing
Put a little oil on the new bushing and inserted it into the tank
Put a little oil on the valve and inserted it into the bushing
Installed the fuel line on the valve
Insert bushing into tank. Insert valve into the bushing. Reattach the gas line to the valve.
The repair worked well and solved the problem
Special thanks for your supplying the needed parts.
1. Remove hose from shutoff valve
2. Remove remnants of bushing & shutoff valve
3. Push new the bushing into tank
4. Lube inside of bushing with a very small amount of oil.
5. Push shutoff valve into the bushing until it snaps into place. This is easiest to do if tank has been removed, but it is not necessary if
... Read moreyou have small enough hands to work under the gas tank.
6. Loosen all vibration mounts.
7. Lift each corner, remove old mount, replace with new mount, go to next corner until all four are replace. I used a piece of wood to hold up the generator between the frame and generator to remove the vibration mount.
8. Retighten each corner mount, operate generator and check for vibration
Read less
Did you find this story helpful?
Thank you for voting!
The valve was leaking gas and the filter was dirty.
1. I emptied the gas tank.
2. Remove the gas tank to facilitate the valve replacement
3. Remove and install the new valve.
4. Re- Install the gas tank back again.
5. I removed the Air Filter plastic cap, replace the old filter by the new one and install the plastic cap back again.
Removed housing that the on off switch was in depressed the ends of the switch with flat head screwdriver and pushed it out.
Put wires on new switch in proper order and snaplocked back into place.
Tilted unit gas tank to put fuel away from the valve end , removed gas line, pulled and wiggled the gas valve out
... Read moreof grommet.
Pried grommet out of tank with small pry bar, pressed new grommet , pressed valve into grommet
Read less
Did you find this story helpful?
Thank you for voting!
the seal and gas shut off valve were old and cracked
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
