Part Location Diagram of 0049382SRV Powermate Circuit Breaker 30a
See part A-19B in the diagram
( Grid squares measure 1x1 inch )

Circuit Breaker 30a 0049382SRV

Manufactured by:
Powermate
ERP Number:
ERP11870975
Part Number:
0049382SRV
Original Equipment Manufacturer ?
$35.66
Special Order

Easy 

30 - 60 mins 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

It is a genuine item that is supplied by the original equipment manufacturer for use with Powermate generators. The circuit breaker is made out of metal and plastic. A screwdriver and a wrench set might be necessary during the installation of this part. It will need to be replaced if it breaks. This item is sold individually.

Troubleshooting

This part works with the following brands:
  • Powermate
This part works with the following products:
  • Generator
Part# 0049382SRV replaces these:
0049382SRV,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Generator would only produce power on one outlet

Bruce from Palmyra, Michigan

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench set
Removed housing holding outlets . Started generator. Took readings with volt meter before and after circuit breakers found two breakers failed replaced all breakers. Power output at all outlets. Reassembled unit and put into use.
Did you find this story helpful?
Thank you for voting!

Just a popped breaker that wouldn\'t re-set

GARY from MANNSVILLE, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
Parts Used:
0049382SRV
Removed the whole front panel/box by loosening 4 nuts and unplugging 2 plugs. Removed back of panel, unplugged the breaker, removed and installed the new one then just reassembled everything. Started the generator and checked all the circuits and they were fine again.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP11870975
Manufacturer Part Number: 0049382SRV
Brand Model Number Description
Powermate PM0106001 Generator - Generator
Powermate PM0116000 Generator - Generator
Powermate PM011600001 Generator - Generator
Powermate PM0473003 Generator - Generator
Powermate PM0474203 Generator - Generator
Powermate PM0474603 Generator - Generator
Powermate PM0496500 Generator - Generator
Powermate PM049650001 Generator - Generator
Powermate PM049650002 Generator - Generator
Powermate PM0496750 Generator - Generator
Powermate PM0497000 Generator - Generator
Powermate PM0497002 Generator - Generator
Powermate PM0504602 Generator - Generator
Powermate PM0505602 Generator - Generator
Powermate PM0505622 Generator - Generator
Powermate PM0601100 Generator - Generator
Powermate PM0601101 Generator - Generator
Powermate PM0601250 Generator - Generator
Powermate PM0601350 Generator - Generator
Powermate PM0606750 Generator - Generator
Powermate PM0647000 Generator - Generator
Powermate PM0647001 Generator - Generator
Powermate PM0676800 Generator - Generator
Powermate PMC601100 Generator - Generator
Powermate PMC601200 Generator - Generator