At 100 inches in length, this dryer drum belt is 3/8 of an inch wide and has five ridges. This belt is all black in color and is made entirely of rubber.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Maytag tumbler belt replacement
Arrived a day earlier than expected,
saved me a lot of money by not having to have a service call cost and what would have most likely have been a higher price for the same belt.
I have ordered other replacements from this site in the past and there never been any problems.
Guest - September 20, 2021
Verified Purchase
★★★★★
★★★★★
Original Belt, Not Knockoff
Easily replaced the broken dryer drum belt. Everything works well.
Guest - January 25, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Unplugged the power cord on the dryer
2. Slid the dryer unit away from the wall.
3. Removed the vent duct from the dryer unit.
4. Removed the front panel, 2 screws at the bottom on the panel.
5. Removed drum retainer.
6. Pulled open the top of the dryer unit.
7. Slid the new belt over the drum.
... Read more/>8. Set the belt on the drive and idler pulley.
9. Rotated the drum till the belt was in the running position.
10. Put the top of the dryer unit back down.
11. Replaced the drum retainer.
12. Reinstalled the front panel.
13. Reattached the vent duct.
14. Plugged in the power cord.
15. Turned on the dryer while door was open and pressing the stop switch on the door.
16 Job complete dryer drum turning like new!
1. Removed dryer front panel.
2. Removed rear panel.
3. Lubricated roller wheel that did not spin freely.
4. Replaced belt (old belt cracked).
5. Replaced front panel.
6. Looped belt over drive motor and tension pulley from back of dryer.
1. Removed front of dryer by releasing retainer clips.
2. Removed top of dryer.
3. Removed drum and old belt.
4. Installed new belt on drum.
5. Reinstalled front and top of dryer with new clips.
6. Removed access panel on rear of dryer to place belt on motor pulley and idler.
7. Replaced access pa
... Read morenel and tested dryer for operation.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
