Mixer Retaining Ring WP9703680

I found your video on \"How to Fix a KitchenAid Mixer That Isn\'t Spinning\" on your site. It made the repair much easier than I thought it would have been. Thank you.

It is very easy repair. first you take off the cover then take off the gear box cover. After you remove snap ring the gears slide off. The hardest part is cleaning off all the old grease so you don\'t have slivers of metal from bad parts ruining the new parts. Just put together in reverse order. If you use the mixer a lot, and mix dough o ... Read more r things heavy you\'ll be doing this more than once. To make it last longer use on low speed, maybe #2.

Take your time and look at the drawings online and print out to reference as you make repairs. I replaced all the gears since the main drive gear was sheared. Mixer works good as new.

After I watched your video everything was easy to do I removed the transmission housing to get to all the gears I changed all of them and the gasket greased all the gears put it together thanks to your video it worked like new

Removed shroud from mixer
Removed gear box housing
Replaced shear pin and snap ring
Reassembled

I removed the top shroud to access the motor and gearbox. I removed the top of the gearbox and replaced both broken gears plus the snap ring that held the drive gear in place.