This is a Genuine OEM Grille used on some Broan brand Range Vent Hoods. This Plastic part is Off-White Color and it includes the Grille Part Number: S85316000 and the Lens Part Number: S89108000 only. This grille does not attach to the unit with springs it is held in place with the reflector. No additional tools required for installation.
Troubleshooting
This part works with the following brands:
Nutone
This part works with the following products:
Bath & Ventilation Fan
★
Customer Part Reviews
?
4.5
Average Rating (out of 5):
★★★★★
★★★★★
(11 Reviews)
Click to filter by ratings:
5 stars
9
4 stars
1
3 stars
0
2 stars
0
1 star
1
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Just what I needed
Right part received quickly. Very happy with the results.
Guest - July 24, 2019
Verified Purchase
★★★★★
★★★★★
You guys are the best
Every time I get my order they are the exact right parts. You guys are the best. Thanx
Harvey - August 3, 2019
Verified Purchase
★★★★★
★★★★★
Exactly what I needed.
Brand new item, got it quickly and it fit perfectly.
Guest - September 30, 2019
Verified Purchase
★★★★★
★★★★★
GREAT COMPANY
GREAT SERVICE JUST WHAT I NEEDED
Guest - March 18, 2020
Verified Purchase
★★★★★
★★★★★
right part right price
will deal again
Guest - May 5, 2020
Verified Purchase
★★★★★
★★★★★
Good Job
Price reasonable, delivery on schedule, part arrived in perfect condition, and was an exact fit. Thank. you well done
Guest - June 15, 2019
Verified Purchase
★★★★★
★★★★★
Fan Lens With Grille
Exact fit. Easy to order.
Guest - September 22, 2020
Verified Purchase
★★★★★
★★★★★
Terrific to find my particular part!
I was so delighted to find the replacement part for my bathroom fan and it saved me having to buy a completely new one. Wish I had found this site earlier!
Guest - October 12, 2021
Verified Purchase
★★★★★
★★★★★
easy to find part and order
parts were great took old down and installed new
Charles - August 22, 2023
Verified Purchase
★★★★★
★★★★★
Great looking and easy to install
The ordering was quick and easy. The shipping, thanks to the USPS, was a disaster. Priority mail was in a circle at the Sacramento facility for a week.
Guest - July 12, 2020
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I had already removed the lens assembly and light. When the part came all I had to do was reattach the light and the assembly fit on it. One hand tightened screw completed the job. The light cover then popped right onto the assembly. Job completed.
Did you find this story helpful?
Thank you for voting!
Old grilles on bathroom exhaust fans yellowed and mildewed
Ensure you have the right model number from the fan unit. And check the dimensions published with the repair part to ensure you have the same size as what you are replacing. Grille and spring assembly is very straightforward. For grille and lens assembly, look at the new parts to see how they go together so you know how to take the old on
... Read moree apart. It will save you some aggravation on the ladder.
Read less
Did you find this story helpful?
Thank you for voting!
Lens was burned and broken. Light wires were brittle & insulation had fallen off.
Turn off the power to the fixture!
1. Lens snaps out with plastic spring clips. Mine disintegrated coming out.
2. Remove the light bulb
3. Light reflector is held in place by a single wing nut.
4. Remove the wing nut, and the reflector and grill will fall and be suspended by the bulb wire
5. Unplug the
... Read more bulb wire (notice which socket it is plugged into)
6. Inspect the bulb wiring. Mine was brittle near the bulb and fell off leaving bare wire.
7. Bulb socket was held in by a spring clip. Squeeze with pliers from the back to remove.
8. Insert the new socket clip in the bracket and pry in to lock it in place
9. Place it in the new grille and I bene the mounting tabs to hold it in place during mounting.
10. Plug the bulb socket into its plug in the fixture.
11. There is a long screw coming down from the center of the fan.
12. That screw goes through the center hole in the bulb reflector.
13. Replace the wing nut on that screw and loosely hold the fixture in place with it.
14. The fixture rotates, so align it with the walls of the room and tighten the wing nut.
15. Replace the bulb. Mine burned because the bulb was to hot for the fixture so I used a 60W LED bulb
16. Snap the new lens into place.
17. Restore power and check operation.
Removed grill and light.
Removed wing nut.
Unplugged light and fan.
Removed light assembly.
Removed Phillips screw.
Pulled fan assembly out.
Pushed in new fan assembly.
Inserted Phillips screw.
Pushed light assembly back in.
Replaced light.
Tighten wing nut back up.
Plugged
... Read more light and fan in.
Snapped light cover back in place.
Replaced grille & lens with new parts. Lens snaps off & grille is held by a wing net. Easy replacement. Did all three units in less than 30 minutes.
Did you find this story helpful?
Thank you for voting!
Bathroom vent fan 20 years old quit working. Grille and lens cover had yellowed over time. Went with replacement parts so I could work inside the house and below and not have to attic crawl.
Removed grille and lens, removed motor housing. Both a have plug ends. Removed motor from housing. Cleaned housing and installed new motor. Reinstalled motor housing, light bulbs and grille. The lens cover on the grille was not as deep as the original. The light bulbs came close to hitting the inside of the cover and felt hot when on. Rep
... Read morelaced the old incandescent bulbs (2) with LED. No heat all good. Done. Note: Replacement motor is better quality than the original.
Unsnapped/removed lens cover,, removed grill by unscrewing wing nut and replaced.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
