Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
10323810-1-M-Delta-426020950002S-Trunnion
Part Location Diagram of 426020950002S Delta Trunnion
See part 122 in the diagram
( Grid squares measure 1x1 inch )
10323810-1-S-Delta-426020950002S-Trunnion Part Location Diagram of 426020950002S Delta Trunnion

Trunnion 426020950002S

Manufactured by:
Delta
ERP Number:
ERP10323810
Part Number:
426020950002S
Original Equipment Manufacturer ?
$15.25
★★★★★
★★★★★
8 Reviews
On Order

Easy 

15 - 30 mins 

(47 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Troubleshooting Reviews Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

A genuine Delta replacement part, sold individually. A trunnion is a cylindrical protrusion used as a mounting and/or pivoting point. Held in place by three Cap Screws (901027631530), this part is compatible with the band saws listed below. A wrench is needed for repair.

Troubleshooting

This part works with the following brands:
  • Delta
This part works with the following products:
  • Band Saw
  • Saw
★

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(8 Reviews)
Click to filter by ratings:
  • 5 stars
    8
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Better than the original that came with the saw.
Better made replacement for the original at a very good price. Replacement was quick and easy.
Guest - April 29, 2020
Verified Purchase
★★★★★
★★★★★
Easy fix, better built than original.
Just what I needed.
Larry - May 18, 2020
Verified Purchase
★★★★★
★★★★★
these parts saved my Delta drill press!!!!
Without these parts being available my Delta laser drill press would essentially be junk. The table would not be usable without these these trunnions and most other parts are no longer made. Really glad I found E-replacement parts. I only wish you had some of the other parts I also need but no one has them! Thank you!
Guest - June 17, 2020
Verified Purchase
★★★★★
★★★★★
Wow !
I found the Right part to repair my old Band Saw !!! Thanks !
Guest - July 7, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair. Tilt table broke in the house move
Repair trunnion was better quality than original Thumbs up to ereplacementparts.com.
Guest - October 28, 2020
Verified Purchase
★★★★★
★★★★★
Drill press repair
I purchased these hoping they would replace the trunnions on my Delta floor drill press. I was pleased when they arrived to see that they were an exact match. The shipping was fast . They don’t have the hole for the angle scale on the side but I don’t need that so it isn’t an issue for me. Very happy since the part number I needed for the drill Press was “obsolete “
Guest - August 4, 2021
Verified Purchase
★★★★★
★★★★★
Part was exactly what I needed. Easy repair.
Part arrived fast.
Frank - November 9, 2021
Verified Purchase
★★★★★
★★★★★
Quality parts
Excellent fitting parts delivered in rapid time. Would use this company again.
Guest - January 29, 2023
Verified Purchase

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(47 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Both trunnions broke

Basil from Concord, North Carolina

15 of 15 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Wrench set
Parts Used:
426020950002S
The trunnions I ordered were beefer than original. So some modifications were needed.
1. Removed the knobs from the cap screws and removed the table from the saw. Turning it upside down on the work bench.
2. Removed the old trunnions with a 7/16\" wrench
3. Used a belt sander to take some width off each side of the clamp shoe until it fit smoothly in the trunnion.
4. The feet on the trunnion had more height so replaced the mounting bolts with 1/4-20 x 3/4\" button head screws.
5. Making sure to put the smaller cap screw in the rear, mounted the new trunnions in place.
6. Remounted the table back on the saw.
Read less
Did you find this story helpful?
Thank you for voting!

Both trunnions were broken

John from Louisville, Kentucky

6 of 6 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
426020950002S
Removed table from bandsaw, matched up trunnions removed old ones by removing the 3 screws on each one that screw into the bottom of the table. Placed back on bandsaw, took about 20 minutes to line everything up works great.
Did you find this story helpful?
Thank you for voting!

Trunnions broke into multiple pieces

Merle from Las Vegas, Nevada

4 of 4 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
Parts Used:
426020950002S
1. Remove table from machine
2. Unbolt trunnions
3. Loosely install new trunnions, these replacement trunnions are much beefier, much better than the original (OE) parts
4. Reposition tilt table and snug attach bolts
5. Check table for proper position and tighten attach bolts
Did you find this story helpful?
Thank you for voting!

Ordered front and rear trunnions for 28-206 Delta Bandsaw table after and accident.

Carl from RIDGECREST, California

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Socket set, Wrench set
Parts Used:
426020950002S
1. Ordered front and rear trunnions when notified that the front trunnion was not available
anymore.
2. Noticed that the front and rear trunnions were identical except that the front had a table level scale that was attach and not really needed (also cost more).
3. Called to make the change and receive the ord er in a few days.
4. Both items were the same and the table works fine.
Read less
Did you find this story helpful?
Thank you for voting!

Both of my trunnions were broken and needed to be replaced.

JAMES from MOUNT CRAWFORD, Virginia

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench set
Parts Used:
426023950005, 426020950002S
Removed the table top
Removed old parts
Replaced with new parts
Reattached the table top.

The replacement part was superior to the original part that I replaced!
Did you find this story helpful?
Thank you for voting!

Original trunniions broke apart due to poor design.

George from Cave Creek, Arizona

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
426020950002S
Took table off of band saw and removed broken trunnions.
Installed new trunnions on band saw.
Set table on top of new trunnions
screwed table to new trunnions.
FYI, left and right trunnion is identical.
Did you find this story helpful?
Thank you for voting!

Band saw was damaged when it fell over during a house move. Saw table took impact of fall, trunnions broke.

John from Lakewood Ranch, Florida

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
Parts Used:
426020950002S
1. Compared new trunnions with broken trunnions to confirm that they would fit. (Part number was different than original, but was the recommended replacement. Mounting lugs on new trunnions were beefier and better than original, though they did elevate the saw table approx. 1/16\" higher than original.
2. Purchased slightly longer m ounting bolts due to thicker mounting lugs.
3. Attached angle scale from old front trunnion to new front trunnion, by drilling holes and attaching with screws.
4. Reassembled trunnions and saw table to bandsaw. .
5. Resquared / releveled saw table. Make sure bandsaw blade still tracks in center of saw table hole, then tighten mounting bolts.
Read less
Did you find this story helpful?
Thank you for voting!

Trunnions on saw broke

Pete from Magalia, California

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
426023950005, 426020950002S
Remove the bolts that connect the trunnions to the table and remove them. Install the new trunnions to the table ,make sure you install the trunnion with the scale in front.
Did you find this story helpful?
Thank you for voting!

Trunnion brackets broke due to age and type of material used.....

Aaron from Mooresville , North Carolina

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Parts Used:
426020950002S, 426020630001S
Removed bolts holding trunnion bracket onto saw and removed broken pieces that were still left on tool. Replaced with the new trunnions and set table back on top and screwed three bolts into each as was with the first set. Also replaced the table insert.

Did you find this story helpful?
Thank you for voting!

Trunnions both broken during move.

Corey from detroit, Michigan

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
901010600637, 426023950005, 426020950002S
1. Removed old trunnions
2. Selected parts from online eReplacement parts catalogue.
3 Easy to follow ordering instructions.
4. Parts received and installed for a perfect fix.
5. Replaced the plate and Voila!
6. Back to work in only a few days.
7. Impressive service when I called to track and the whole experience highly professional.
Read less
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP10323810
Manufacturer Part Number: 426020950002S
Brand Model Number Description
Delta 18-900L Drill Press - 18" Drill Press
Delta 28-141 Band Saw - Band Saw
Delta 28-200 Band Saw - Band Saw
Delta 28-203 Band Saw - Band Saw
Delta 28-203-BDK Saw - Saw
Delta 28-205 Saw - Saw
Delta 28-205-BDK Saw - Saw
Delta 28-207-BDK Saw - Saw
Delta 28-209 Band Saw - Band Saw
Delta 28-209-BDK Saw - Saw
Delta 28-216 Band Saw - 14&#34 Band Saw
Delta 28-216-BDK Saw - Saw
Delta 28-230 Band Saw - Band Saw
Delta 28-230-BDK Saw - Saw
Delta 28-231 Band Saw - 14&#34 Band Saw
Delta 28-231-BDK Saw - Saw
Delta 28-240 Band Saw - Band Saw
Delta 28-240-BDK Saw - Saw
Delta 28-241 Band Saw - 14&#34 Band Saw
Delta 28-241-BDK Saw - Saw
Delta 28-243 Band Saw - Band Saw
Delta 28-245 Band Saw - Band Saw
Delta 28-248 Band Saw - Band Saw
Delta 28-248F Band Saw - Band Saw
Delta 28-248G Band Saw - 14&#34 Band Saw
Delta 28-254 Band Saw - 14&#34 Band Saw
Delta 28-255 Band Saw - Band Saw
Delta 28-262 Band Saw - 14&#34 Band Saw
Delta 28-263 Band Saw - 14&#34 Band Saw
Delta 28-269 Band Saw - Band Saw
Trunnion
$ 15.25
On Order
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖