This is a genuine Char-Broil replacement part, sold individually. Stainless steel carryover tube. Tube channel measures 4-3/4" long. (this measurement does not include the mounting tabs). Comes with 2 cotter pins. Carryover tubes connect the gas grill burners and carry the flame from one burner to the next. Over time, your carryover tubes may rust or warp. This would be the time to replace them.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Good fit
Dimension are precise, works as expected and quality seems on par with OEM
Guest - August 5, 2019
Verified Purchase
★★★★★
★★★★★
Quick delivery
Carry over tubes for my grill were delivered faster than expected, fit perfectly and my grill is working as it should!
Guest - August 26, 2019
Verified Purchase
★★★★★
★★★★★
great company
Parts came right on time and fit perfectly. will use this company again.
Jane - January 27, 2020
Verified Purchase
★★★★★
★★★★★
Great part
Received in a timely manner. Is working as expected. Will definitely use this site for any future orders
Guest - September 29, 2020
Verified Purchase
★★★★★
★★★★★
BBQ Grill Parts
I ordered some carryover tubes for my Char Grill to replace the old corroded ones. The website is excellent with showing pictures of what I needed. That gave me confidence that they would send me the right parts. Great service and quick shipping. This is the third time I have ordered something from ereplacement parts. Very good source for parts. Thank You!!!
Guest - June 24, 2022
Verified Purchase
★★★★★
★★★★★
Fast shipping
Ordered the part for my grill. Exact fit and easy install!
Guest - August 11, 2022
Verified Purchase
★★★★★
★★★★★
Fast, easy and a life extender!
Grill still has a few years left now, 15 minute install, very easy with a pliers and screwdriver.
Guest - May 30, 2023
Verified Purchase
★★★★★
★★★★★
Excellent.
Perfect.
Guest - September 28, 2023
Verified Purchase
★★★★★
★★★★★
EASY FIX. PARTS LOOK GREAT
EVERYTHING THAT CAME IN WAS GREAT. TOOK AWHILE BUT NOT YOUR FAULT. YOU KEPT ME UPDATED ON THE PARTS STATUS. THANKS
Guest - June 25, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I pulled the grates and removed the clips holding the cross over tubes and the main burners down. Pliers made this a little easier but are not required. This was an easy fix and everything fit perfect.
The parts were rusted and hard to remove. I soaked the in WD-40 and let it soak for a while. Then I was able to remove them. I then cleaned the area. And install the new parts. The extra time was the soaking.
1. Remove grills, then flame tamers. Set grill aside and discard old flame tamers if degraded.
2. Remove 8x \"R\" clips from the top of the burners towards the rear of the BBQ. Discard the old \"R\" clips.
3. Remove & discard old carryover tube assemblies.
4. One at a time, lift back of burners, then carefully pull tow
... Read moreards rear of BBQ to expose igniters and ignition wires.
Use a small flathead screwdriver to carefully pop off the ignition clips (be careful not to break them or the igniters).
Remove & discard old burners.
5. One at a time, attach igniters to notched portion of the new burners using the clips on the igniter. Slide end of burner into the hole towards the front of the BBQ and rest the other end of the burner on the mounting point at the rear of the BBQ. Attach 4 new \"R\" clips to the mounting point eye holes to secure the burner in place.
6. Loosely screw \"R\" clip mounts that came with the burners into the screw holes on the top of the burners, near the rear of the BBQ.
7. Rest the new carryover tube assemblies on the screw mounts, with the open edge of the assemblies facing the front of the BBQ.
8. Attach 4 new \"R\" clips to the mounting screws on the burners. Loosen the screws if necessary to get the clips on.
9. Use a flathead screwdriver to carefully tighten the screw mounts and secure the carryover tube assemblies.
10. Turn on the propane and test all burners.
11. Rest flame tamers in place and reinstall grills.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of G515-0015-W1 Char-Broil Carryover Tube Assembly")
_WW_1.gif "Part Location Diagram of G515-0015-W1 Char-Broil Carryover Tube Assembly")
