Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
10294839-1-M-Char-Broil-G430-3800-W2-Main Burner Tube, No Electrode
Part Location Diagram of G430-3800-W2 Char-Broil Main Burner Tube, No Electrode
See part 19 in the diagram
10294839-1-S-Char-Broil-G430-3800-W2-Main Burner Tube, No Electrode 360 view
( Grid squares measure 1x1 inch )
10294839-1-S-Char-Broil-G430-3800-W2-Main Burner Tube, No Electrode 10294839-1-S-Char-Broil-G430-3800-W2-Main Burner Tube, No Electrode 360 view
Part Location Diagram of G430-3800-W2 Char-Broil Main Burner Tube, No Electrode

Main Burner Tube, No Electrode G430-3800-W2

Manufactured by:
Char-Broil
ERP Number:
ERP10294839
Part Number:
G430-3800-W2
Original Equipment Manufacturer ?
$17.56
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This is a replacement part designed for use with Char-Broil grills. Burners distribute gas to create an even flame across the cooking area. It is made out of stainless steel and it is sold individually. Features a built-in spider guard protection. Please note electrode is sold separately. No tools needed to replace this burner. • Make sure the gas tank is disconnected • Remove burner from the valve • Install the new burner • Re-connect the gas and test the grill

Troubleshooting

This part works with the following brands:
  • Char-Broil
This part works with the following products:
  • Grill

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The burners, diffusers and carryover tubes had rusted out.

Brent from Crete, Nebraska

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
G550-5104-W1, G550-0006-W1, G501-0010-W1, G430-3800-W2, G413-0004-W2
I took out the old parts. The burners were the hardest to remove because the screws were rusted. I had to drill them out. Otherwise it went together very well. It was also tricky trying to plug in the new electrode, but I eventually got it. All the parts were exactly the same as the original at half the price as other stores or busin esses!!
Read less
Did you find this story helpful?
Thank you for voting!

Many parts were rusted out. Burner leaked gas. Carryover tubes completely inoperative. Diffusers rusted into pieces.

MATTHEW from Crystal Lake, Illinois

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
G550-5104-W1, G550-0006-W1, G430-3800-W2, G413-0004-W2
1. Removed Grill and Heat Diffusers. Replaced Heat shield (two easy screws).
2. Used pliers to remove rusted carryover tube screws (most time consuming)
3. Replaced burner and installed carryover tubes (just a few screws).
4. Installed new Heat Diffusers (set them in) and put grill back.
Did you find this story helpful?
Thank you for voting!

Replaced the worn out parts

Mark from Willowick, Ohio

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
G430-3800-W2, G430-0046-W1, G413-0004-W2
Unscrewed the old parts, cleaned the grill. Then installed the new parts in reverse order of the old parts without a problem. And placed the heat diffusers in by hand.
Did you find this story helpful?
Thank you for voting!

Burners and carryover tubes rusted

Louis from Farmingdale, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
G430-3800-W2, G413-0004-W2
I had to drill out rusted retaining screws on burners and then replaced parts.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10294839
Manufacturer Part Number: G430-3800-W2
Brand Model Number Description
Char-Broil 41516114010 Grill - Grill
Char-Broil 41516123801 Grill - Grill
Char-Broil 41516128010 Grill - Grill
Char-Broil 464220110 Grill - 4 Burner Gas Grill with Side Burner
Char-Broil 464220111 Grill - Grill
Char-Broil 464220311 Grill - Gas Grill
Char-Broil 464220511 Grill - Gas Grill
Char-Broil 464310209 Grill - 3 Burner Gas Grill
Char-Broil 464311009 Grill - 3 Burner Grill
Char-Broil 464323510 Grill - Gas Grill
Char-Broil 464324009 Grill - 3 Burner Gas Grill
Char-Broil 466220111 Grill - Grill
Main Burner Tube, No Electrode
$ 17.56
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖