Black Light Switch S97016970

1. Removed filter.
2. Removed fan and light cover.
3. Removed two screws and removed shield to access switch.
4. Removed wire nuts and removed broken switch.
5. Replaced switch and wire nuts.
6. Replaced shield, light and fan cover.
7. Replaced filter.
8. Tested switch and it worked.

Removed the old switch from the housing
Exchanged the leads form the old switch to the new switch
Pressed the new switch back into the housing

1. Removed the lamp unit from the range hood
2. Replaced the transformer ballast unit along with the lamp ends and the light switch ( the components that the ballast wires go to since I was in there and they were inexpensive.
3. Reassembled and reinstalled the lamp control unit to the hood.
4. Turn on the switch and e ... Read more verything works like new.

This repair was easy and probably cost only 10% of what it would have cost if I brought in an electrician who would have wanted to replace the entire range hood unit instead of replacing old components.

Replaced light switch and starter. All I needed was a screw driver. I got expert advice from your technical support group. They analyzed my problem and gave me their recommendations what needed to be replaced. They were spot on their analysis.