This is a genuine OEM approved part that is specially made for Bissell upright vacuums. It is an identical replacement for a missing or faulty brush roll that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. The rotating brush helps to pick up the material from the carpet, unfortunately over time it may wear or get damaged eventually requiring a replacement. Keep in mind this high-quality item is made of durable materials and is sold individually.
Troubleshooting
This part works with the following brands:
Bissell
This part works with the following products:
Upright Vacuum
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the screws from the brush base, then remove the belt from the motor shaft, then pull out old brush roll. Put the belt around the brush roll, press the brush roll in place , then stretch the belt over the motor shaft. Then install the brush base.
Did you find this story helpful?
Thank you for voting!
The brush roller was worn down and the lever release was broken, the handle would not stay upright.
1. Remove the screws from the bracket of the vacuum surrounding the brush roller.
2. Remove the belt from around old roller and the roller comes right out.
3. Replace the belt around the new roller and it snaps right into place.
4. Replace the screws back in the bracket holding the roller unit.
1. Remove two
... Read more screws holding case surrounding the lever release.
2. Remove the lever release by prying out with small screwdriver, a little pressure is required and another set of hands to help. One set of hands with small screwdriver to slightly spread the case holding the lever and the other set of hands to pop the lever out. A little pressure is necessary.
3. Snap new lever in place.
4. Replace the cover and the screws.
Read less
Did you find this story helpful?
Thank you for voting!
Key burning belts, wouldn\'t suck properly, handle wouldn\'t stay in the up position.
Removed handle securing screws in order to replace broken lever release, re assembled screws to hold up handle.
Remove base plate and r&r brush roller and new belt with new base cover.
R & R filter with new one
Vacuum works like new
Pulled cover off head, remove and replace roller brush, reinstall belt, Replace cover nd start machine
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
