Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
10143923-1-M-Makita-241652-0-Fan 65
Part Location Diagram of 241652-0 Makita Fan 65
See part 10 in the diagram
( Grid squares measure 1x1 inch )
10143923-1-S-Makita-241652-0-Fan 65 Part Location Diagram of 241652-0 Makita Fan 65

Fan 65 241652-0

Manufactured by:
Makita
ERP Number:
ERP10143923
Part Number:
241652-0
Original Equipment Manufacturer ?
$16.35
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

1- 2 hours 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Troubleshooting Repair Instructions Model Cross Reference

Troubleshooting

This part works with the following brands:
  • Makita
This part works with the following products:
  • Sander Polisher
  • Sander Grinder

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Makita Sander 15yrs. old , Both plastic feet broke

John from Oakdale, Minnesota

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Parts Used:
911111-5, 241652-0
1st repair:
1. Removed (4) fine thread screws for the base unit (sand paper Hold downs )
2.Removed (2) screws for the air fan / lower bearing housing
3.Removed bearing fastener screw/ this released the bearing & fan
4. Removed (2) upper housing screws & the (2) lower housing screws
5. Separated the hous ing & removed the broken feet ( new feet ordered )
6. Installed new feet, installed the upper/ lower housing screws
7. Installed fan ( square notched ) & lower bearing & locking screw
8 Installed fan/bearing housing (2) screws
9 Installed 3 of the (4) base screws & then cross threaded the 4th
OPP\'S . ordered (1) plastic foot & (4) base screws & replacement fan
Back to Step #4
10 Installed the (1) new plastic foot
11. put the (2) housing units together ( 2 shorter screws Top )
12. Installed the New Fan
13. Installed fan/bearing housing (2) screws \" Tested motor & spun nicely \"
15. installed base /hold downs (4 ) screws \"Tested motor & Spun nicely \"
FYI : I like the \"OLD\" sand paper hold downs: VS the NEWER Style /sander
Two units to pass to my grand boys
Read less
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10143923
Manufacturer Part Number: 241652-0
Brand Model Number Description
Makita BO4510 Sander Polisher - Finishing Sander
Makita BO4530 Sander Polisher - Finishing Sander
Makita M901 Sander Polisher - Finishing Sander
Fan 65
$ 16.35
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖