Milwaukee Hole Hawg, 413B. Removed the chuck along with the screw in the center. It\'s reversed threads, tightened up a 3/8 allen wrench in the chuck & hit it with my dead blow hammer. Carefully remove the rear cover, be careful because you need to lift it off and wiggle it evenly straight up. If one of the gears doesn\'t let loose fr
... Read moreom the cover just stick your finger in & push down on the gear and pull straight up on the cover until it breaks loose. There\'s a certain order that everything comes out. Print out the parts sheet so you know what to expect and lay everything out. I carefully cleaned up the parts, removed old grease inside & clean out with solvent.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10131712
Manufacturer Part Number: 44-70-0160
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 44-70-0160 Milwaukee Shifting Plunger")
_WW_1.gif "Part Location Diagram of 44-70-0160 Milwaukee Shifting Plunger")
