This cord is a genuine Milwaukee replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation and a cord protector for a long service life.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Factory new
Ordered this cord for an older drill replacement that was frayed. Old drill was 3 prong and new cord was 2 prong. Appeared previous owner had converted it to 3 prong so had to rewire it back to factory specs Nd now works great,
Guest - August 19, 2019
Verified Purchase
★★★★★
★★★★★
Hi Quality Replacement
Easy to install and very satisfied.
Guest - October 14, 2019
Verified Purchase
★★★★★
★★★★★
Prompt delivery. Better than original cord
Exact replacement cord for my Milwaukee grinder. Quality cord that does not get stiff in the cold weather. Easy install since the connectors were already installed
Guest - January 21, 2020
Verified Purchase
★★★★★
★★★★★
Easy Repair--Just what I needed
Fast Shipping. Part was exactly what I needed to fix my tool. Back up & running in a very short amount of time. Website was easy to navigate & find what I needed.
Guest - September 8, 2020
Verified Purchase
★★★★★
★★★★★
Exact Replacement
The same cord that came on my saw from the factory. Easy replacement for a worn and frayed cord. Also, quick shipping. Good service.
Guest - February 20, 2021
Verified Purchase
★★★★★
★★★★★
Just Right!!
This was just a described. It arrived right on schedule. The part was the exact one I needed. Thank you eReplacementParts.
Bob - September 4, 2021
Verified Purchase
★★★★★
★★★★★
Milwaukee side grinder replacement cord
Exact replacement cord. It arrived quickly. Highly recommend this company!
Thanks!
Guest - January 21, 2022
Verified Purchase
★★★★★
★★★★★
Good quality and great fit
Good quality and great fit - good price and quick delivery - can't ask for more these days
David - August 19, 2023
Verified Purchase
★★★★★
★★★★★
Cord Was Stiff
It had a nice, brand new look and feel to it and arrived in good timing, but it was not flexible like the cord we were trying to replace.
Guest - August 30, 2023
Verified Purchase
★★★★★
★★★★★
power cord
the service of Ereplacement is very good but they offer expedite delivery thru the post Office service and we all know the service of USPS is the worse service there is.
Fernando - June 8, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed the torx head screws from the handle.
2. Took the handle apart.
3. Removed the old cord by pulling the blade style connectors apart.
4. Took the new cord, replaced it by plugging in the blade connections then put the handle back together.
1. Unplugged the grinder.
2. Removed four screws holding the grinder case together.
3. Disconnected the spade connections on the broken cord.
4. Installed the spade connections. Almost had to use needle nose pliers to make this connection but was able to make the connection with my fingers.
5. Installed the case us
... Read moreing caution with the fit of the cord into the restraining grooves of the case.
6. Installed the four screws.
Removed motor cover. Pulled two wire clips on old cord and installed clips on new cord. Replaced motor cover and it worked like new.
Did you find this story helpful?
Thank you for voting!
Power cord broke at strain relief after repeated bending at the strain relief while storing the tool .I weed this tool professionally til my retirement now it is used once in a Wikileaks for my hobbie
Removed the screws that hold the case closed removed the old wire with a pair of needle nose pliers ins tallied new cord and replaced the cover job done.
Opened up back of grinder. Removed old pieces. Glad to see how power cord was installed. Miluakee makes good tools and seeing inside reinforced that opinion. Happy to be able to repair servicable tool back to top condition.
Did you find this story helpful?
Thank you for voting!
4 1/2 inch milwaukee grinder power cord was broken
Removed 4 ea screws to access old power cord , plugged in the new power cord , blew out the dust while I was there , installed the 4 ea screws that hold the case together and I was done , as far the flange goes , in some applications you use it on the drive shaft , and for some grinding wheels its not used.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10122740
Manufacturer Part Number: 22-64-0840
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 22-64-0840 Milwaukee Power Cord (8-foot)")
_WW_1.gif "Part Location Diagram of 22-64-0840 Milwaukee Power Cord (8-foot)")
