Part Location Diagram of BC0438 Senco Seal
See part 11 in the diagram
( Grid squares measure 1x1 inch )

Seal BC0438

Manufactured by:
Senco
ERP Number:
ERP10071620
Part Number:
BC0438
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

Less than 15 mins 

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is an authentic manufacturer sourced replacement part designed for use with Senco nailers. This part is used to create an air-tight seal for the bushing, over time the material may begin to deteriorate and crack eventually requiring replacement to maintain peak performance. It is made of high-quality rubber material and it is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Senco
This part works with the following products:
  • Nailer

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Stapler started leaking air.

Jason from Fort Gibson, Oklahoma

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
BC0438
I removed the end cap on the stapler and noticed the seal was crumbling and get lodged in the piston and keeping it from sealing. So I found the inexpensive part on ereplacementparts,com and replaced it. Hardest part was locating the correct seal. luckily I saved the original manual and it had a parts list in it.
Did you find this story helpful?
Thank you for voting!

Seal blew

Jon from Bagley, Minnesota

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
BC0438
Remove the 4 bolts on top cap
Removed all of the old seal
Put new seal on can
Put top cap with bolts on
And presto hook up air and go back to work
Did you find this story helpful?
Thank you for voting!

Leaking out of the exhaust port at rear

Jonathan from Fort Smith, Arkansas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
BC0438, AC0287
1. Remove end cap.
2. Remove end cap gasket. Cylinder is too wide to remove without taking off the gasket.
Carefully scrape off torn pieces.
3. Remove cylinder, keeping track of hammer and bumpers/spacers at the front.
4. Remove broken pieces of rear cylinder seal.
5. Clean cylinder and check O-rings, ap plying oil as necessary.
6. Reinstall cylinder, hammer, bumper, spacers into main body.
7. Line up gasket and reinstall cap.
8. Dry fire before trying nails. Hammer may need to reset itself internally.
Did you find this story helpful?
Thank you for voting!

Air was leaking out of the exhaust on a Senco Stapler SNS41

David from Markesan, Wisconsin

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
BC0438
Remove the top and pull off the seal replace with the new one and reassemble.
Better than buying the complete rebuild kit for $65.00 or more!!!!!
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10071620
Manufacturer Part Number: BC0438
Brand Model Number Description
Senco SNS41 Nailer - Nailer