It is a genuine item that is supplied by the original equipment manufacturer for use with riding lawn mowers and garden tractors. This is an identical replacement for a missing or damaged brake pads that were originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of these parts. Keep in mind this high-quality set includes two durable pads.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Parts worked on a 1998 42 inch Murray mower.
Pads fitted perfectly.
The lever was rusted and broke in half. This lever was the closest I could find. Worked fine by installing it 180 degrees and finding a new place to hook the back spring.
Guest - April 28, 2019
Verified Purchase
★★★★★
★★★★★
exact fit, reasonable shipping costs
The part arrived faster than I expected, and in good condition.
Guest - April 27, 2019
Verified Purchase
★★★★★
★★★★★
Great service
Parts arrived in time except for a spacer that was not in stock
Vincent - October 16, 2019
Verified Purchase
★★★★★
★★★★★
Prompt Good service
Part was shipped very fast Received it quickly. was able to repair my lawn tractor brakes and get mowing again. thank you
Guest - October 30, 2019
Verified Purchase
★★★★★
★★★★★
Delivery issue.
There was a issue with the shipping company. It took 21 days to receive the items. Not a E replacement issue.
Guest - September 13, 2021
Verified Purchase
★★★★★
★★★★★
Replacement Brake pads
Shorter than OE pads but had no problem replacing
Guest - May 28, 2020
Verified Purchase
★★★★★
★★★★★
Fraude
En la foto se ven bien, cuando la recibes apenas las puede ver en la bolsa de tan pequeñas que son. Gracias por el engaño.
Hector - May 7, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Jacked up mower.
2. Removed right rear wheel.
3. Disconnected brake push rod.
4 Unbolted brake caliper and removed it.
5. Used gear puller to remove brake disk because of rust.
6. Removed inner brake pad.
7. Removed outer brake pad from caliper.
8. Removed, cleaned, and lubricated caliper
... Read moredowels and push plate.
9.Reversed above procedures to reassemble, Using new pads and disk.
10. Adjusted brake.
Lifted the tractor up by the rear and removed the disc brake assembly. Cleaned the part including the pins that fall out when the pads are taken out. Then I found the disc was not sliding on the shaft (it needs to do that to let the pads to apply evenly then used. I cleaned the shaft and the inside of the disc so it would slide on the sha
... Read moreft). Reinstalled the caliper and adjusted the brake adjustment on the rod so it would apply when I wanted it to and allow the clutch to release.
Removed rear wheels, removed disc pad assembly, made missing compression springs, installed new disc pads bolted assembly back on ,adjusted brakes and installed rear wheels.
1. Jacked up Tractor
2. Pulled retaining clip holding wheel on.
3. Unscrewed bolts holding bracket for outside brake pad.
4. Removed disk
5. Removed inside brake pad.
6. Put it all back together .
Did you find this story helpful?
Thank you for voting!
Preventive maintenance
Juan from Boqueron, Puerto Rico
1 personfound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Brake pads fitted a Murray select 1998 42ö mower.
The lever was broken in half so this is the closest part I could find. It fitted but just installed it 180 degrees. And found a new place under the mower to attach the back spring.
Everything was real easy to reinstall and is working perfectly.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10015109
Manufacturer Part Number: 799021
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Transmission or Clutch","title":"Transmission or Clutch","url":"/parts/lawn-and-garden/lawn-tractor/transmissions-and-clutches/"},{"position":2,"name":"799021","title":"799021","url":""}]
