This replacement starter housing assembly is used with MTD and Troy-Bilt string trimmers. It is a genuine part that is sourced directly from original equipment manufacturer. This starter assembly allows user to start the trimmer by pulling the starter rope. It includes a plastic shroud/housing, starter pulley, starter spring, grip, the pull rope and the screws to secure it. You will need a screwdriver to complete this repair.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Starter housing
Easy replacement
Jerry - June 29, 2019
Verified Purchase
★★★★★
★★★★★
The part I purchase from you got here sooner than I expected and fit my weed wacker perfect runs good thank you very much for yoir people that took my ordet in a fadt pace and receiving my part quickly thank you again
Will use you again
Guest - August 22, 2019
Verified Purchase
★★★★★
★★★★★
Worked as Expected!!!
The item arrived ahead of time and was exactly what I ordered!!!
Guest - February 13, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
Just like new again.
Guest - December 12, 2020
Verified Purchase
★★★★★
★★★★★
Met expectations.
I had my machine up and running soon after I got the part. No secondary fitting needed.
Guest - May 13, 2021
Verified Purchase
★★★★★
★★★★★
Fit great
Easy install worked great
Terry - March 28, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the clutch cover. Then remove the spark plug and insert a length of rope into the cylinder, leaving a few inches out. Then pull on the starter rope until the piston comes in contact with the rope and stops the engine from turning. Then using a torx T-20 (As I remember it might be a T-25) remove the clutch drum. Then with safety gla
... Read moresses on, strike an edge of the clutch with a hammer and screwdriver until it is loose, once usually does it. Then remove the old starter housing assembly by removing the screws that secure it. An install the new one. Replace the clutch assembly and clutch cover in reverse order of tear down. Remove the rope from the cylinder, and install the new spark plug gapped at 0.025 I also replaced the o-ring between the cylinder and rocker cover.
Installed new cover. Attached all screws.
Then the spacer.
Attached to mower frame.
Attached clutch (have to put rope in cylinder so you can tighten screw)
Attached clutch cover.
Then all parts to finish, idler pulley, belt, drive pulley, covers, blade bearings and blade.
Need to take notes, or picture
... Read mores or place parts in order how you took them off to get it al back in order and with the right screws.
0 Watch YouTube how-to\'s
1 Removed casing that contains pull rope.
2 remove choke \"plate\"
3 replace throttle wire
4 attach choke plate
5 put on new casing, pull rope included.
Tricky part, removing clutch. I had adjustable pliers that couldn\'t grip it well. They could grip it with a perpend
... Read moreicular grasp, so I stuck the screwdriver between the two wrench jaws and used the screwdriver as a lever.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 753-06314 MTD Starter Hsg Asm")
_WW_1.gif "Part Location Diagram of 753-06314 MTD Starter Hsg Asm")
