Part Location Diagram of 17211-ZL8-023 Honda Air Cleaner Element
See part A-2 in the diagram
( Grid squares measure 1x1 inch )

Air Cleaner Element 17211-ZL8-023

Manufactured by:
Honda
ERP Number:
ERP9903219
Part Number:
17211-ZL8-023
Original Equipment Manufacturer ?
Special Order

Easy 

15 - 30 mins 

(63 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine Honda replacement part, it is sold individually. The purpose of this filter is to help eliminate dirt, dust, and debris from contaminating the carburetor and damaging the engine. A dirty air filter can prevent the engine from operating properly. This filter can be cleaned a time or two by using an air supply, but it is advised to replace it once it becomes dirty.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Honda
  • MTD
  • Briggs and Stratton
  • Toro
  • Yard Machines
  • Cub Cadet
  • Murray
  • Craftsman
This part works with the following products:
  • Engine
  • Lawn Mower
  • Tiller
  • Generator
  • Pressure Washer
Part# 17211-ZL8-023 replaces these:
  • 17211-ZL8-003

Customer Part Reviews

?
4.9
Average Rating (out of 5):
★★★★★
★★★★★
(78 Reviews)
Click to filter by ratings:
  • 5 stars
    73
  • 4 stars
    2
  • 3 stars
    3
  • 2 stars
    0
  • 1 star
    0
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(63 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Lawn mower would not start

jacob from port neches, Texas

12 of 12 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set, Wrench (Adjustable)
First I removed the air cleaner cover and removed the the old air cleaner and installed the new one. I then removed the coil assembly from the unit and installed the new on, and gapped distance between the coil and the magnets on the flywheel at 0.024 I then replace the spark plug and gapped the new one at 0.030 and installed it in the en gine. Engine runs very well now.
Did you find this story helpful?
Thank you for voting!

Engine would surge while running

Tony from Searcy, Arkansas

12 of 12 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
I watched the you tube video on replacing a Honda carburetor. After I watch it, I was able to replace all of the other parts that I had ordered. Here is a copy of the video that was so helpful to me. Enjoy. https://www.youtube.com/watch?v=D32zXNYSxmw
Did you find this story helpful?
Thank you for voting!

Honda Excell Pressure Washer - Gummed Up Carb

Mike from Snohomish, Washington

10 of 10 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set, Wrench set
After purchasing a new pump for my old Honda Excell pressure washer, I was bummed to find out that my carb had apparently fouled/gummed over the winter. I spent a few hours and bucks on trying to clean the carb, but to no avail. After testing the fuel pump to see if was functioning perfectly I was very pleased to see that for only $28 I c ould get the carb, gaskets, and a new air cleaner from here!! Having already taken the old carb on/off a few times I was plenty familiar with the myriad of items that have to be held up and go through two bolts for this engine/carb setup. After 4-5 pulls(cause the fuel bowl was dry), the engine started right up. I was finally able to pressure wash my driveway this past weekend and the engine fired on the first pull and ran for 7 hours without fault. Love the great price for parts, and fast shipping here, and will certainly return if anything else should fail on my small engines!!
Did you find this story helpful?
Thank you for voting!

Engine surging due to carburetor problem

John from Endicott, New York

9 of 9 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
1. Removed the air filter
2. Unbolt the carburetor and air cleaner case
3. Removed control linkage
4. Remove carburetor, clean off all gasket residue
5. Install new gasket and carburetor, all of the pieces must be staged on the two carburetor bolts.
Did you find this story helpful?
Thank you for voting!

I broke the cover to my air filter on my Honda mower

Hugh from Grove City, Ohio

9 of 9 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
1. Removed the broken cover
2. Install new filter
3. Placed the new cover in the slot and clicked it in
Did you find this story helpful?
Thank you for voting!

Replace air cleaner

Robert from Forest, Virginia

8 of 8 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
17211-ZL8-023
Remove air cleaner cover, and remove used air cleaner. Install new air cleaner and replace air cleaner cover.







Did you find this story helpful?
Thank you for voting!

Dead Carburetor on Old Tiller

Glory from Winter Garden, Florida

8 of 8 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
The carburetor on my 10+ year old tiller finally stopped working correctly. I took the old one off and put the new one on. It wasn\'t as hard as I\'d envisioned. I had my husband check my work when he came home as I\'d never done this before. It took a few pulls and my old tiller works great. Actually, it hasn\'t run that smoothly in a good many years.

Even for a total newbie like me there really aren\'t any special instructions. I just took everything off that I needed to while noting their position and how they were in there in the first place. Then replaced the parts and put it back together. The nice thing is that the only socket I needed was a 10mm. There were two short screws and two very long bolts holding it on and that\'s all. Really not a bad repair. I think my time is higher because it was my first ever engine repair. It would probably take a person who knows what they are doing far less time.
Did you find this story helpful?
Thank you for voting!

Running rough and rpms surging

Matthew from Silver Spring, Maryland

7 of 7 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
1. I removed the old carburetor (three 10 mm bolts behind the air cleaner element), noting the order of the gaskets, the spacer, the shield plate and the linkage connections.
2. I disconnected the fuel line after moving the spring clip with pliers.
3. I connected the new carburetor to the two linkages and with new gaskets, re using the spacer at the engine block. I also attached the fuel line and moved the spring clip back in place to secure the hose.
3. I tightened the 10 mm bolts that hold the carb in place.
4. I replaced the air cleaner element and then the spark plug (also changed the crankcase oil).
5. Runs great now!
Did you find this story helpful?
Thank you for voting!

Rear door not closing fully allowing grass to escape

Roger from Clearlake, Washington

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Wrench set
Removed two bolts holding cover on.
transferred springs to replacement door
reinstalled bolts and tightened with wrench.
removed belt cover
removed v belt retainer
slid off old belt
refitted new belt
installed v belt retainer
reattached cover
There was no need to remove blade or ada pter.to change the drive belt.

Did you find this story helpful?
Thank you for voting!

Exhaust rocker arm broke

Jacob from Bradenton , Florida

4 of 4 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Unit would not run and backfired through carburetor. Removed valve cover and found broken exhaust rocker arm. Replaced both rocker arms. Performed valve lash adjustment. Reinstalled valve cover and installed new air filter. Unit started up on second pull and took a minute to start running normally.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP9903219
Manufacturer Part Number: 17211-ZL8-023
Brand Model Number Description
Briggs and Stratton 01054-2 Pressure Washer - Briggs & Stratton Pressure Washer Model 01054-2 (010542, 01054 2) Parts
Briggs and Stratton 01054-3 Pressure Washer - Briggs & Stratton Pressure Washer Model 01054-3 (010543, 01054 3) Parts
Briggs and Stratton 01170-0 Generator - Briggs & Stratton Generator Model 01170-0 (011700, 01170 0) Parts
Briggs and Stratton 01431-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01431-0 (014310, 01431 0) Parts
Briggs and Stratton 01431-1 Pressure Washer - Briggs & Stratton Pressure Washer Model 01431-1 (014311, 01431 1) Parts
Briggs and Stratton 01431-2 Pressure Washer - Briggs & Stratton Pressure Washer Model 01431-2 (014312, 01431 2) Parts
Briggs and Stratton 01431-3 Pressure Washer - Briggs & Stratton Pressure Washer Model 01431-3 (014313, 01431 3) Parts
Briggs and Stratton 01431-4 Pressure Washer - Briggs & Stratton Pressure Washer Model 01431-4 (014314, 01431 4) Parts
Briggs and Stratton 01434-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01434-0 (014340, 01434 0) Parts
Briggs and Stratton 01434-1 Pressure Washer - Briggs & Stratton Pressure Washer Model 01434-1 (014341, 01434 1) Parts
Briggs and Stratton 01434-2 Pressure Washer - Briggs & Stratton Pressure Washer Model 01434-2 (014342, 01434 2) Parts
Briggs and Stratton 01435-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01435-0 (014350, 01435 0) Parts
MTD 11A-109Q597 Lawn Mower - MTD Lawn Mower Model 11A-109Q597/2008 (11A109Q597/2008, 11A 109Q597/2008) Parts
MTD 11A-109Q897 Lawn Mower - MTD Lawn Mower Model 11A-109Q897 (11A109Q897, 11A 109Q897) Parts
MTD 11A-419Q229 Lawn Mower - MTD Lawn Mower Model 11A-419Q229 (11A419Q229, 11A 419Q229) Parts
MTD 11A-439Q597 Lawn Mower - MTD Lawn Mower Model 11A-439Q597 (11A439Q597, 11A 439Q597) Parts
MTD 11A-542Q724 Lawn Mower - MTD Lawn Mower Model 11A-542Q724/2008 (11A542Q724/2008, 11A 542Q724/2008) Parts
MTD 11A-544C059 Lawn Mower - MasterCut Lawn Mower Model 11A-544C059/2009 (11A544C059/2009, 11A 544C059/2009) Parts
Yard Machines 11A-544G200 Lawn Mower - Yard Machines Lawn Mower Model 11A-544G200 (11A544G200, 11A 544G200) Parts
MTD 11A-544S231 Lawn Mower - MTD Lawn Mower Model 11A-544S231 (11A544S231, 11A 544S231) Parts
Yard Machines 11A-546N229 Lawn Mower - Yard Machines Lawn Mower Model 11A-546N229 (11A546N229, 11A 546N229) Parts
MTD 11A-549Q597 Lawn Mower - MTD Lawn Mower Model 11A-549Q597/2008 (11A549Q597/2008, 11A 549Q597/2008) Parts
MTD 11A-549Q897 Lawn Mower - MTD Lawn Mower Model 11A-549Q897 (11A549Q897, 11A 549Q897) Parts
MTD 11A-A09Q897 Lawn Mower - MTD Lawn Mower Model 11A-A09Q897/2013 (11AA09Q897/2013, 11A A09Q897/2013) Parts
MTD 11A-B22C759 Lawn Mower - MasterCut Lawn Mower Model 11A-B22C759 (11AB22C759, 11A B22C759) Parts
Murray 11A-B23M758 Lawn Mower - Murray Lawn Mower Model 11A-B23M758 (11AB23M758, 11A B23M758) Parts
Murray 11A-B23Z758 Lawn Mower - Murray Lawn Mower Model 11A-B23Z758 (11AB23Z758, 11A B23Z758) Parts
MTD 11A-B24A059 Lawn Mower - MasterCut Lawn Mower Model 11A-B24A059/2012 (11AB24A059/2012, 11A B24A059/2012) Parts
MTD 11A-B24Z758 Lawn Mower - MTD Lawn Mower Model 11A-B24Z758 (11AB24Z758, 11A B24Z758) Parts
MTD 11A-B29Q897 Lawn Mower - MTD Lawn Mower Model 11A-B29Q897/2011 (11AB29Q897/2011, 11A B29Q897/2011) Parts