This replacement intake gasket is an authentic manufacturer sourced item, it is specially produced for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. The purpose of this gasket is to create an air tight seal for the intake manifold. Over time gaskets tend to deteriorate and crack eventually requiring replacement to maintain peak performance. It is made from high quality composite material and it is sold individually.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Years worth of replacement parts
I have been using your replacement parts for years and have been happy with all orders. Everything was right the first time and shipping was on time. I will continue using your service until all my stuff quits breaking down which will never happen so consider me a return costumer for a long time.
Guest - June 6, 2021
Verified Purchase
★★★★★
★★★★★
a necessary tool was omitted.
I ordered a needle valve and seat to fix the carburetor on my mower. The seat must be pressed into place with a little tool that costs almost nothing, but it was not included with the kit nor suggested separately. I had to order it from another vendor, and my work is delayed for another week or more.
Guest - June 15, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
remove carburetor and float bowl and float and needle valve tap inside of seat in carburetor with a 1/4 twenty tap then threaded bolt in and then pulled out old seat and then tapped in new seat with a punch until it hits home at bottom reassemble carburetor and put back on engine
1. Removed the breather assembly.
2. Removed the carburetor.
3. Removed the intake manifold.
4. Replaced the manifold and the gasket.
5. Reinstalled the carburetor and the gaskets.
6. Reinstalled the breather assembly.
7. Runs fine!
Did you find this story helpful?
Thank you for voting!
Tractor ran rich and extremely hard to start
Wade from IRWIN, Pennsylvania
1 personfound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set, Wrench (Adjustable), Wrench set
I thought the float valve was not working, even after a complete carb rebuild. Pulled the head to check for burnt or stuck valves, significant carbon build up, but valves still closed correctly. Had weak spark, but it was there, so I replaced the coil, it did not run at all after that, so I pulled the kill wire from the magneto, the mac
... Read morehine started, the carburetor adjustments were effective, better than before. Found a safety module that checks seat interlock, gear interlock, and deck engagement before you are allowed to start the machine. This module 68-2940 part number on a Toro 55600 series tractor kills the engine by grounding the ignition magneto coil.
So, I replaced the head gasket after cleaning the head and valves, put a float valve in the carb, by the way the little green ring goes in with a raised lip on the bowl side of the valve, replaced the coil and will install a new ignition switch and module coil when it comes in.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9274334
Manufacturer Part Number: 272554S
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/lawn-and-garden/engine/seals-and-gaskets/"},{"position":2,"name":"272554S","title":"272554S","url":""}]
