Part Location Diagram of 27828S Briggs and Stratton Gasket-intake
See part B-52 in the diagram
( Grid squares measure 1x1 inch )

Gasket-intake 27828S

Manufactured by:
Briggs and Stratton
ERP Number:
ERP8938381
Part Number:
27828S
Original Equipment Manufacturer ?
$5.95
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

A Bit Difficult 

1- 2 hours 

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

It is a manufacturer supplied replacement part that is designed for use with Briggs and Stratton engines. This carburetor intake gasket which provides an air tight seal for the breather assembly. Over time gaskets tend to deteriorate and crack eventually needing a replacement. It is made from durable composite material and it is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • Toro
  • Simplicity
  • Murray
This part works with the following products:
  • Engine
  • Snow Blower
Part# 27828S replaces these:
27828,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Upper carburetor flange broke requiring replacement

Mark from South Berwick, Maine

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
270684, 691610, 399443, 27828S
The repair was pretty straight forward. One aspect that took a while to figure out is that you have to remove the jet and tube through the main jet adjusting screw on the bottom to be able to remove the upper carburetor assembly.
Also I had to slightly ream the holes in the new assembly to get the float pin to fit.

Runs good now.
Did you find this story helpful?
Thank you for voting!

Carburetor was all plugged up needed all new parts

JAMES from DELEVAN, New York

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Disassemble complete carburetor and do a total rebuild works perfectly retapping the threaded holes and new needle and seat are the key
Did you find this story helpful?
Thank you for voting!

log splitter 8 h.p. engine leaking gas

Daniel from Hillsboro, Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
692214, 27828S
removed the carburetor from engine.
removed the gasket -intake-carburetor
removed the manifold
checked the replacement part to the gasket on the manifold, they weren\'t the same size
assessed that current gasket for the manifold was still in very good shape.
didn\'t use the gasket provided.
put the mani fold back on
replaced the gasket - intake- carburetor
Did you find this story helpful?
Thank you for voting!

Had not used this greater for several yrs and the gaskets in the carb hardened and leaked

George from Knoxville, Tennessee

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
691587, 394693, 270093, 27828S
1 Removed carburetor 2/ Totally disesesembled carb 3/ matched all parts in kit 3/ Reesembled carb reconnected carb to engine (2 phillips bolts) 4 put gasoline into gas tank and pumped gas into carb to check for leaks. The whole process took a little over an hour. Pretty simple to re do.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8938381
Manufacturer Part Number: 27828S
Brand Model Number Description
Briggs and Stratton 140201-0110-99 Engine - Engine
Briggs and Stratton 140201-0110-XX Engine - Horizontal Engine
Briggs and Stratton 140201-5040-10 Engine - Engine
Briggs and Stratton 140201-5050-10 Engine - Engine
Briggs and Stratton 140201-9126-99 Engine - Engine
Briggs and Stratton 140201-9126-XX Engine - Horizontal Engine
Briggs and Stratton 140202-0015-99 Engine - Engine
Briggs and Stratton 140202-0015-XX Engine - Horizontal Engine
Briggs and Stratton 140202-0111-99 Engine - Engine
Briggs and Stratton 140202-0111-XX Engine - Horizontal Engine
Briggs and Stratton 140202-0125-99 Engine - Engine
Briggs and Stratton 140202-0125-XX Engine - Horizontal Engine
Briggs and Stratton 140202-0130-99 Engine - Engine
Briggs and Stratton 140202-0130-XX Engine - Horizontal Engine
Briggs and Stratton 140202-0132-99 Engine - Engine
Briggs and Stratton 140202-0132-XX Engine - Horizontal Engine
Briggs and Stratton 140202-0135-99 Engine - Engine
Briggs and Stratton 140202-0135-XX Engine - Horizontal Engine
Briggs and Stratton 140202-0137-99 Engine - Engine
Briggs and Stratton 140202-0137-XX Engine - Horizontal Engine
Briggs and Stratton 140202-0139-99 Engine - Engine
Briggs and Stratton 140202-0139-XX Engine - Horizontal Engine
Briggs and Stratton 140202-0140-99 Engine - Engine
Briggs and Stratton 140202-0140-XX Engine - Horizontal Engine
Briggs and Stratton 140202-0141-99 Engine - Engine
Briggs and Stratton 140202-0141-XX Engine - Horizontal Engine
Briggs and Stratton 140202-0142-99 Engine - Engine
Briggs and Stratton 140202-0142-XX Engine - Horizontal Engine
Briggs and Stratton 140202-0144-99 Engine - Engine
Briggs and Stratton 140202-0144-XX Engine - Horizontal Engine