Part Location Diagram of 691610 Briggs and Stratton Gasket-nozzle
See part A-114 in the diagram
( Grid squares measure 1x1 inch )

Gasket-nozzle 691610

Manufactured by:
Briggs and Stratton
ERP Number:
ERP9074220
Part Number:
691610
Original Equipment Manufacturer ?
$9.70
Special Order

A Bit Difficult 

1- 2 hours 

(3 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

A genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. This replacement gasket helps to provide an air-tight seal between the nozzle and the high-speed valve, for correct location and application please refer to your engines diagrams. Over time the material may deteriorate breaking the seal, inspect gaskets and seal periodically and replace them as needed to maintain top performance. It is made of high-quality composite material and it is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Briggs and Stratton
  • Toro
  • Cub Cadet
  • Simplicity
  • Craftsman
This part works with the following products:
  • Engine
  • Snow Blower
  • Generator
Part# 691610 replaces these:
68667,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Upper carburetor flange broke requiring replacement

Mark from South Berwick, Maine

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
270684, 691610, 399443, 27828S
The repair was pretty straight forward. One aspect that took a while to figure out is that you have to remove the jet and tube through the main jet adjusting screw on the bottom to be able to remove the upper carburetor assembly.
Also I had to slightly ream the holes in the new assembly to get the float pin to fit.

Runs good now.
Did you find this story helpful?
Thank you for voting!

Carburetor was all plugged up needed all new parts

JAMES from DELEVAN, New York

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Disassemble complete carburetor and do a total rebuild works perfectly retapping the threaded holes and new needle and seat are the key
Did you find this story helpful?
Thank you for voting!

Limb chipper had sat for 2 years. Would not stay running.

Peter from VANCOUVER, Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
Parts Used:
27918, 691610
Removed carburetor, cleaned out. reassembled. Bowl gasket disintegrated and needed replacement
Bought needle but was not the right size and used the old one.

Looked up needle valve settings in a youtube video

Started right up
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9074220
Manufacturer Part Number: 691610
Brand Model Number Description
Briggs and Stratton 08799-1 Generator - Briggs & Stratton Generator Model 08799-1 (087991, 08799 1) Parts
Briggs and Stratton 09085-4 Generator - Briggs & Stratton Generator Model 09085-4 (090854, 09085 4) Parts
Briggs and Stratton 142300 Engine - Engine
Briggs and Stratton 142700 Engine - Engine
Briggs and Stratton 143300 Engine - Engine
Briggs and Stratton 146400-0232-99 Engine - Engine
Briggs and Stratton 146400-0232-XX Engine - Horizontal Engine
Briggs and Stratton 146400-146468 Engine - To 146468 (0010 - 0076) Gas Engine
Briggs and Stratton 146401-0010-99 Engine - Engine
Briggs and Stratton 146401-0010-XX Engine - Horizontal Engine
Briggs and Stratton 146401-0110-99 Engine - Engine
Briggs and Stratton 146401-0110-XX Engine - Horizontal Engine
Briggs and Stratton 146401-0135-99 Engine - Engine
Briggs and Stratton 146401-0135-XX Engine - Horizontal Engine
Briggs and Stratton 146401-0147-99 Engine - Engine
Briggs and Stratton 146401-0147-XX Engine - Horizontal Engine
Briggs and Stratton 146401-0177-99 Engine - Engine
Briggs and Stratton 146401-0177-XX Engine - Horizontal Engine
Briggs and Stratton 146401-0192-99 Engine - Engine
Briggs and Stratton 146401-0192-XX Engine - Horizontal Engine
Briggs and Stratton 146401-0200-99 Engine - Engine
Briggs and Stratton 146401-0200-XX Engine - Horizontal Engine
Briggs and Stratton 146401-0213-99 Engine - Engine
Briggs and Stratton 146401-0213-XX Engine - Horizontal Engine
Briggs and Stratton 146401-0510-99 Engine - Engine
Briggs and Stratton 146401-0510-XX Engine - Horizontal Engine
Briggs and Stratton 146401-0610-99 Engine - Engine
Briggs and Stratton 146401-0610-XX Engine - Horizontal Engine
Briggs and Stratton 146401-0648-99 Engine - Engine
Briggs and Stratton 146401-0648-XX Engine - Horizontal Engine