Jump to:
This replacement chuck and key assembly is a genuine OEM sourced part designed for use with Delta and Black and Decker power equipment. It is used to secure drill bits. If your drill's bit retention is suffering, the rotation feels stiff, or the chuck has seized up entirely, a new chuck should resolve these issues. This chuck includes the screws. There are several methods to remove a drill press chuck. When installing the new chuck clean the spindle of the chuck with a rag and a degreasing agent. • Using a chuck removal tool is the easiest way to remove a drill press chuck • A piece of hardwood and a hammer can be used to remove a chuch as well • Once the old chuck is removed and the spindle is cleaned • Insert the drill chuck into the press firmly enough for it to stay in on its own • Retract the jaws of the drill press chuck to prevent damaging them • Lower the press table to open up some hammer-swinging space • Using a wooden or rubber mallet, strike the bottom of the chuck quickly and forcefully two or three times
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our experts a question about this part and we'll get back to you as soon as possible!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Hi Ken, Thank you for your question. The chuck key is now available with the chuck and key assembly. The part number listed under your model number for the chuck and key assembly is 1310049. If you would like to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Hi Luis, Thank you for your question. The part number listed under your model number for the chuck and key is 1310049. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
Hello Marty, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 1310049. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Chuck was worn and wouldn\'t tighten.
Thomas from Harrisville , Michigan
Old 0 -1/2\" chuck was worn out.
william from hurley, New York
Chuck had internal rust and was difficult to loosen and tighten
Tony from Barkhamsted, Connecticut
Wobbled
Rickey from DEER PARK, Washington
chuck and drill press would not hold drill bit tight
Raymond from NEWARK, Ohio
Broken spindle return spring and old Jacobs chuck slipping bits
Michael from Waxahachie, Texas
Bad drill press chuck
thomas from Camp Douglas, WI
Put on new chuck
Russell from MOLINE, Michigan
Chuck seized.
Paul from WARE SHOALS, South Carolina
| Brand | Model Number | Description |
|---|---|---|
| Delta | 11-072 | Drill Press - Drill Press |
| Delta | 11-090 | Drill Press - Drill Press |
| Delta | 11-900 | Drill Press - Drill Press |
| Delta | 11-950 | Drill Press - Drill Press |
| Delta | 11-980 | Drill Press - Drill Press |
| Delta | 11-985 | Drill Press - Drill Press |
| Delta | 11-990 | Drill Press - Drill Press |
| Delta | 14-040 | Drill Press - Drill Press |
| Delta | 15-067 | Drill Press - Drill Press |
| Delta | 15-068 | Drill Press - Drill Press |
| Delta | 15-077 | Drill Press - Drill Press |
| Delta | 15-078 | Drill Press - Drill Press |
| Delta | DP115 | Drill Press - Drill Press |
| Delta | DP1BA2 | Drill Press - Delta Dp1ba2 Drill Press |
| Delta | DP200 | Drill Press - 10" Drill Press |
| Delta | DP250 | Drill Press - Drill Press |
| Delta | DP300 | Drill Press - 12" Drill Press |
| Delta | DP300L | Drill Press - 12" Crosshair Laser Drill Press |
| Delta | DP350 | Drill Press - 12" Variable-Speed Bench Drill Press |
| Black and Decker | SM300 | Drill Press - 10 Drill Press |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
