This is a genuine OEM sourced replacement part designed for use with a drill press. It allows height adjustment handle to retract. It is made out of metal and it is sold individually. This assembly includes a metal spring, housing and a retainer. You would need a wrench to complete this repair.
Troubleshooting
This part works with the following brands:
Delta
Black and Decker
This part works with the following products:
Drill Press
★
Customer Part Reviews
?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(11 Reviews)
Click to filter by ratings:
5 stars
11
4 stars
0
3 stars
0
2 stars
0
1 star
0
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Drill press spring
It fitted perfectly, Worked great.
Guest - July 29, 2020
Verified Purchase
★★★★★
★★★★★
Right part
Right part arrived ahead of schedule
Guest - October 21, 2020
Verified Purchase
★★★★★
★★★★★
Perfect replacement part.
Everything fit perfectly
Guest - January 11, 2021
Verified Purchase
★★★★★
★★★★★
Amazing quick and accurate service
A simple, but essential part for an old drill press. Didn't expect to find it, but there it was, available even, in stock! Order acknowledged immediately, shipping promised in 4-5 days. Received in less time. Well done!
Guest - June 25, 2021
Verified Purchase
★★★★★
★★★★★
Exactly what I needed. Your website was easy to use so I could quickly find the part I needed.
The part for my old drill press fit exactly and was easy to install. It arrived to me the day promised.
Guest - July 10, 2021
Verified Purchase
★★★★★
★★★★★
I actually ordered the wrong part but the return process was simple.
I ordered the wrong part.
Guest - July 27, 2021
Verified Purchase
★★★★★
★★★★★
Easy order
Ordered return spring for the drill press. The spring arrived on schedule and was properly packed in a recyclable bag.
Guest - December 29, 2021
Verified Purchase
★★★★★
★★★★★
Easy to install
Arrived much faster a I expected. Spring was of very good quality.
Guest - April 6, 2022
Verified Purchase
★★★★★
★★★★★
The part I ordered did the job to make the repair
Drill press back up and working
Iglobal - June 21, 2023
Verified Purchase
★★★★★
★★★★★
perfect part
I received the exact part that I needed quickly and was able to make the necessary repair.
Guest - July 17, 2023
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Ordered Delta part 1310084 return spring assembly. Ryobi does not have this part anymore. It worked perfectly. Took the nuts off the handle shaft and slid the flat center of spring in the slot of shaft and replace nuts but not tight. Then turned the out spring cover until the drill chuck shaft was lifted all the way up. Then tighten the
... Read morenuts just enough so the shaft recoiled up smoothly.
Read less
Did you find this story helpful?
Thank you for voting!
The return spring broke and my chuck just dropped to bottom position and would not lift.
1. The two nuts had been removed from the slotted bolt to slide off the housing, spring & lock washer to discover the spring had broken.
2. Slide the housing, spring and lock washer onto bolt assuring you have gotten the spring tab into the slot of the bolt.
3. Have the chuck in the raised position and slid the housing with t
... Read morehe lock washer in the proper position.
4. Screw the nuts onto the bolt leaving space between the inside nut and the housing.
5. Try the handles raising the chuck and determine if it\'s the lift you want.
6. If not, turn the housing a quarter turn counter-clockwise tightening the spring and raise the chuck again.
7. If it\'s the return you want, tighten the outside nut up to the inside nut. They do not have to be tight.
I ordered a v-belt thinking it should be replaced since I have used this drill press for 11 years, but the old belt is perfectly sound, so I will just keep it as a spare.
Read less
Did you find this story helpful?
Thank you for voting!
Spring broke that lift the drill back to the top of the stroke
Knocked old Jacobs chuck of with a hammer and a block of wood and reinstalled new with same. Removed old return spring and replaced with new and adjusted for proper spindle return. Right parts for the right price.
Removed 2 nuts holding the retract spring housing.
Removed retract spring housing and broken spring.
Installed new retract housing and spring combo
Installed the 2 nut that hold the spring housing
Adjusted spring tension
Tightened nuts holding spring housing
1. Removed lock nut assembly.
2. Removed coil spring cassette.
3. Installed new spring cassette.
4. Re-installed lock nut assembly.
Spindle didn\'t return completely after re-assembly, but this was easily corrected by loosening the lock nuts and rotating the spring cassette thereby tightening the coil. Tightened th
... Read moree lock nuts and all is well.
Remove nuts holding housing on pinion gear shaft.
Remove housing and spring fragments.
Replace housing and spring, being careful to engage tab in center of spring in slot on end of shaft.
Rotate housing CCW to tension spring enough to raise quill to top.
Engage housing in tabs on drill press body.
Replace nut
... Read more to secure housing on shaft.
Replace second nut to secure fist nut on shaft (Jam nut).
Read less
Did you find this story helpful?
Thank you for voting!
The spring that pulls up the chuck assembly broke.
1 Removed 2 nuts and removed old spring assembly.
2. Mounted the new assembly, tightened it by spinning it until it lifted the chuck assembly.
3. The first nut was tightened until it just barely touched the new housing ( must be able to spin).
4. The second nut is now tightened against the first nut, locking it in p
... Read morelace.
1. Used wrenches to loosen and remove nuts.
2. Removed broken spring with housing
3. Replaced with new parts
4. Tensioned spring system as instructed in owners manual
5. Tightened nuts
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Spring or Shock Absorber","title":"Spring or Shock Absorber","url":"/parts/power-tool/drill-press/springs-and-shock-absorbers/"},{"position":2,"name":"1310084","title":"1310084","url":""}]
