Jump to:
Product Description
?This kit is an OEM part direct from Craftsman for air compressors. This kit consists of the parts for building a piston cylinder in the compressor. It is recommended that you release air and unplug the air compressor before you install this kit. You will need a wrench set to replace this part. This kit includes two o-rings, piston ring clamp screw and the cylinder tube. This kit is made of metal and rubber components.
Frequently Purchased Together
?Troubleshooting
- No compressed air
- DeVilbiss
- Craftsman
- Porter Cable
- Black and Decker
- DeWALT
- Compressor
Customer Part Reviews
?- < Prev
- 1
- 2
- 3
- Next >
- < Prev
- 1
- 2
- 3
- Next >
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
Ask our experts a question about this part and we'll get back to you as soon as possible!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
- < Prev
- 1
- Next >
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hi Dan, Thank you for your question. If the air compressor is not building pressure, we would recommend checking the piston cylinder kit, the ring, and the valve plate assembly. We hope this helps!
Hello David, Thank you for your inquiry. There are two reasons an air compressor can trip a breaker, electrical and mechanical. Several factors can cause your compressor to pull too much power, so first make sure that that amp rating on the compressor does not exceed the amperage the outlet can handle. Check the safety valve, piston kit with o-rings, the fan and filter kit, and check valve for any visible damage. Good luck with your repair.
Hello James, thank you for your question. The original Piston kit is now discontinued. However, If your piston rod is okay and the piston ring is replaceable, use the K-0650 cylinder kit. You can also get the Ring individually as part DAC-308. We hope this helps.
Hello Mike, thank you for writing. No, the part you had chosen is not compatible for your model. The correct part for your model number is K-0650. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- 2
- 3
- Next >
Piston ring wore out and allowed the piston to gouge the cylinder liner.
Mark from Bulverde, Texas
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
- Parts Used:
- K-0650
Removed cylinder head.
Removed piston ring and cylinder liner.
Reassemble by reverse of the above.
The directions in the repair kit were pictorial and easy to understand.
Piston sleeve and seal
Eugene from Brandon, Vermont
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Wrench set
- Parts Used:
- K-0650
No air machine ran an ran no air
CARL from CINCINNATI, Ohio
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set, Wrench (Adjustable)
- Parts Used:
- K-0650
Compressor was really slow to build air pressure and really loud
Kevin from Roy, Utah
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
- Parts Used:
- K-0650
Stopped pumping air but was still running
bobby from norwood, North Carolina
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set, Wrench set
- Parts Used:
- K-0650
Compressor failed to build up pressure
Gregory from Orland, California
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Compressor would not build pressure, also external regulator leaked.
William from Worcester, Vermont
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers, Socket set, Wrench (Adjustable)
On low pressure cylinder:
- Removed valve plate assy, piston/rod, and cylinder.
- Installed new cylinder.
- Replaced piston seal: removed piston top, replaced seal on piston, put piston top back on piston and hand tightened screw a bit, inserted piston in cylinder, finished tightenin ... Read more g piston top screw.
- Attached piston rod to crank, replaced fan.
- Placed and tightened new valve assembly with new o-rings.
Removed/replaced external regulator.
Did not address high pressure side, parts are no longer available.
Still, compressor does build pressure good as new.
compressor would not produce air
Ronald from Wayland, New York
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Wrench set
- Parts Used:
- K-0650
Make sure to clean parts before reinstalling them.
Compressor not pumping air.
Troy from Groves, Texas
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set, Wrench (Adjustable)
Compressor would only pump up to 40 psi.
Roger from KEVIL, Kentucky
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set, Wrench (Adjustable), Wrench set
- < Prev
- 1
- 2
- 3
- Next >
Model Cross Reference
Manufacturer Part Number: K-0650
| Brand | Model Number | Description |
|---|---|---|
| Craftsman | 16871 | Compressor - Air Compressor |
| DeVilbiss | 1WC94 | Compressor - Construction Compressor |
| DeVilbiss | 1WC95 | Compressor - Workshop/Auto Compressor |
| DeVilbiss | 3JR71 | Compressor - Workshop/Auto Compressor |
| DeVilbiss | 4UP72 | Compressor - A 6.0hp 25g Vp Pl 1stg 12 |
| DeVilbiss | 5Z598C | Compressor - A 2.0hp 3g Hd Pl 1stg 120 |
| DeVilbiss | 66-651 | Compressor - Air Compressor |
| Craftsman | 919-15445 | Compressor - A 1.5hp 4g Ss Pl 1stg 120 |
| Craftsman | 919-16345 | Compressor - A 1.5hp 4g Pc Pl 1stg 120 |
| Craftsman | 919-16500 | Compressor - A 5.0hp 25g Hp Pl 1stg 12 |
| Craftsman | 919-16511 | Compressor - A 6.0hp 33g Hp Pl 1stg 12 |
| Craftsman | 919-16512 | Compressor - A 5.0hp 20g Hp Pl 1stg 12 |
| Craftsman | 919-16513 | Compressor - A 6.0hp 30g Vp Pl 1stg 12 |
| Craftsman | 919-16518 | Compressor - A 5.5hp 25g Hp Pl 1stg 12 |
| Craftsman | 919-16519 | Compressor - A 5.5hp 25g Vp Pl 1stg 12 |
| Craftsman | 919-16523 | Compressor - A 5.5hp 25g Vp Pl 1stg 12 |
| Craftsman | 919-16551 | Compressor - A 6.0hp 30g Vp Pl 1stg 12 |
| Craftsman | 919-16552 | Compressor - A 6.0hp 33g Hp Pl 1stg 12 |
| Craftsman | 919-16553 | Compressor - A 6.0hp 30g Vp Pl 1stg 12 |
| Craftsman | 919-16554 | Compressor - A 6.0hp 33g Hp Pl 1stg 12 |
| Black and Decker | 919-16555 | Compressor - 6.0 Horse Power 30 Gallon Compressor |
| Craftsman | 919-16557 | Compressor - A 5/1.7hp 30g Vp Pl 1stg |
| Craftsman | 919-16558 | Compressor - A 5/1.7hp 33g Hp Pl 1stg |
| Craftsman | 919-16560 | Compressor - A 6.5hp 60g Vs Tv 1stg 24 |
| Black and Decker | 919-16561 | Compressor - 7.0 Horse Power 60 Gallon Compressor |
| Craftsman | 919-16633 | Compressor - A 6.5hp 33g Hp Tv 1stg 24 |
| Black and Decker | 919-16670 | Compressor - 3.5 Horse Power 20 Gallon Compressor |
| Craftsman | 919-16721 | Compressor - A 5.5hp 20g Hp Pl 1stg 12 |
| Craftsman | 919-16722 | Compressor - A 5.5hp 22g Vp Pl 1stg 12 |
| Black and Decker | 919-16728 | Compressor - 120 Volt Air Compressor |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.