Genuine Delonghi replacement part, this item is sold individually. This O-Ring is used as a seal to keep liquid from leaking between two connected parts. Because of the heat that this part comes in contact with it does wear out often. It is advised to have an extra one or two on hand.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Coffee pot repair
The o-ring fit perfectly. It was received in just a few days. My coffee maker is back to making a great cup.
Guest - August 15, 2022
Verified Purchase
★★★★★
★★★★★
I ring for steam wand
Perfect fit
Guest - May 25, 2023
Verified Purchase
★★★★★
★★★★★
It is the right part. No more water leaks.
It arrived very quickly, no more water drip, thank you for your help ereplacementparts!!
Nicholas - September 22, 2019
Verified Purchase
★★★★★
★★★★★
Easy Repair
After taking off the top, the tube was easy to access. Just remove the spring clip, pull out the tube end, fish out the old o-ring with a toothpick or other tool, then put the new O-Ring on the end of the tube and insert. Replace the spring clip and top and you are good to go.
Guest - October 31, 2019
Verified Purchase
★★★★★
★★★★★
Completely satisfied
Work as expected, arrived quickly in Canada
Iglobal - February 25, 2020
Verified Purchase
★★★★★
★★★★★
"O" rings and tube
I ordered two "O" rings and the tube connecting the pump to the pressure relief valve on my DeLonghi Espresso machine. I had been experiencing a leak in this area. These parts were a really snug fit and very easy to install. I have no further leaks and my machine is now back in tip top shape. Thank you eReplacement Parts.
Iglobal - July 21, 2020
Verified Purchase
★★★★★
★★★★★
Wrong parts
It was not the right parts showing on your drawing I guess you guys assumed that what’s ever is in the other part of tube will be the same on the orther end, when I open my coffee maker it’s was different, I’m not sure if you guys have it because it’s not on the drawing that’s you guys providing
Guest - December 30, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove sides, back, top and front control panel following video on eReplacementparts.com web site. Remove clips where tubes connect to generator and other interior machine parts, remove tube, remove old o-ring, replace with new o-ring, replace clips. Reassemble.
Did you find this story helpful?
Thank you for voting!
Leaking water from the heating element connection to water pump when machine is brewing
I unplugged the machine and removed the water tank and water tank cover. Then, I unscrewed the two screws on top of the machine holding the main covers in place, and carefully pried the steam knob off. After that, taking the cover off the unit is a little tricky. There\'s a tab in the back that locks it into place and takes some finesse t
... Read moreo not break while trying to take the cover off.
Once it\'s off however, I located the tube running from the water pump to the heating element, removed the alligator clip holding it in place, and carefully pulled the tube free from the connector. I had to fish the o ring out from the connector with a toothpick, but it was relatively easy. I then slipped the new o ring over the tube, re-inserted the tube very firmly into the connector, locked it in place with the alligator clip, and tested the machine for leaks. Once confident that the leaks were solved, I replaced the cover, steam knob, etc and screwed everything back into place.
Overall a very simple repair, just take your time and make sure to use common sense.
Read less
Did you find this story helpful?
Thank you for voting!
When trying making espresso water was leaking everywhere but where it was supposed to.
Open the machine up and try to run it, saw that water was spraying from the valve. Ordered a new valve the o rings and a spring (because I lost it on the disassembly) on the small hose that connects the valve to the boiler i replaced the 2 o rings and replaced the valve. Tried again the machine and everything was back to normal!:) now I h
... Read moreave my espresso machine working like new and for under 10$, love it!
P.s the valve just need screw in, I used some pliers to tie it up (not too hard)
1. Removed water tank & used coffee catcher and tray.
2. Removed sides, back, and top panel.
3. Carefully make relief in wires, and water tubes
4. Remove 4 mounting screws and the generator assembly
5. Remove water connection to generator.
6. Remove and replace connector tail piece.
7. Reverse steps 5 t
... Read morehrough 1 in reverse order.
The hardest part was reaching three screws which secure the top of the machine. It requires a star drive. All of the other screws are small Phillips heads. After you remove those and two on the back, the top will lift right off.
I promise, everything is very intuitive. Unplug the hoses by simply pulling on them, remove the pu
... Read moremp by wiggling it off its rubber mounts and unscrew the water valve connected to the pump the pump. Replace those with the new ones and reverse the process.
I chose to change a few of the other little pieces of tubing, simply because I was under the covers - super simple and cheap.
I also replaced the spring and valve on the head (where the water comes out) to ensure that the new pump didn\'t overwhelm an old valve.
This pump works perfectly in our Delonghi EC702, it actually is an improvement over the original one. With these parts changed, we have a completely new machine!
Thanks eReplacement for the super fast service and clear parts catalog!
Read less
Did you find this story helpful?
Thank you for voting!
Steam leak from top of machine under cup warming rack
Remove the screws from outside and take of back panel
Remove screws at top of each side panel and remove sides
Remove top cover to expose the generator under the cup warming rack
Remove the retaining clips on the top tube and remove tube and o-rings
Replace tube and o-rings with new and reassemble
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10310752
Manufacturer Part Number: 5313217701
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/small-appliance/coffee-maker/seals-and-gaskets/"},{"position":2,"name":"5313217701","title":"5313217701","url":""}]
