This cord is a genuine DeWalt replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 2 Prongs • 2 Wires • 16 Gauge • 10 Feet Long
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy repair
Perfect replacement!
Guest - September 29, 2020
Verified Purchase
★★★★★
★★★★★
Great Experience
Found a video on-line on how to fix my DeWalt saw with replacement parts. The video was excellent and was sponsored by eReplacement Parts. So, I checked their web-site and they had the DeWalt parts in stock ready for quick delivery. So I tried them out. Great experience. Had the parts fast and installed them quickly with no issues. Thanks, Daniel
Guest - January 20, 2021
Verified Purchase
★★★★★
★★★★★
Power cord replacement - quality part - easy repair
The power cord took a few weeks to ship (not sure why) but it got here and is of good quality. You will need the terminals as the old ones are not reuseable and that isn't mentioned when you are looking at the cord. The terminals are available at ReplacmentParts and they shipped the same day they were ordered. This was an easy repair but watch the video before start.
Guest - February 10, 2021
Verified Purchase
★★★★★
★★★★★
Exact replacement
I ordered a replacement cord for my Dewalt sliding miter saw as it was wore out from years of use. I received thee exact same cord as a replacement. In todays world, that's saying something. Thanks
Guest - November 5, 2021
Verified Purchase
★★★★★
★★★★★
haven't tried to repair tool yet, this is on shipping
ERP doesn't listen or read. I put both my physical address and my post office box on the shipping label. Where I live, USPS will not deliver to my shop and UPS/FedEx will not deliver to my POB. So not matter what I have delivered to me I always put both address' on the label. ERP took off (they simply chose to remove the POB address) the POB and shipped USPS so the post office sent it back. It took 12 days to get what I payed to have in about 5 days. Bad communication, bad service.
Guest - October 5, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove one half of the handle. Remove the switch. Remove the cord clamp. Remove the cord wires from the switch. Slide the cord protector on the cord and reattached the cord leads to the switch. Reattach the cord clamp. And assemble the handle.
Removed the handle and removed old cord. It had to be detached from trigger mechanism. Removed piece that holds cord into saw and placed on new cord. Reattached cord to trigger assembly and inserted trigger assembly. Placed handle back in place and screwed back in place.
Did you find this story helpful?
Thank you for voting!
Power cord had worn out due to wrapping the cord around the motor when in storage
1)Remove the 2 screws holding handle to top of motor housing.
2)Remove the (8?) screws holding the top of the motor housing together.
3)Remove wire nut on neutral (white) wire.
4)Remove power cord and cord protector from motor housing.
5)Thread new power cord through cord protector.
6)Insert new cord assembly
... Read more into motor housing.
7)Connect neutral (white) wires with wire nut.
8)Cut old hot (black) wire at a location were new black wire and a additional wire nut will fit in the motor housing.
9)Connect hot (black) wires with a new small wire nut.
10)Reassemble top of motor housing and handle removed in steps 1 & 2.
11)Plug new cord in a power outlet and test run the saw.
Removed the screws from the top handle, and removed the carrying handle. Took a picture of how all the parts in the lower handle were assembled and wired. Removed the cord clamp from the top handle , then removed the cord. I then removed the parts from the lower handle\' then removed the lower handle from the saw. I installed the new lowe
... Read morer handle on the saw, then replaced all of the internal parts. I then slid the new cord protector on the new cord and connected the cord. Screwed on the cord clamp. Then installed the top handle on and screwed the handles together. I then screwed the carrying handle to the top handle.
Followed online instructions BUT I had to go to the hardware store to purchase a O-ring, because the one needed for the locking pin was NOT included with the new pin.
Watched a video made replacing it a lot easier.
Found out the new power cord ran over the motor not under by watching another video on adjusting the miter,
Made the change now my DW902 works great
Separated the handle parts; removed the white and black wire connections; cut the new wire to reveal copper wire; reconnected; replaced handle; tested connection. Perfect.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
