This is a genuine DeWALT trigger switch. This trigger switch is used in handheld power tools, primarily polishers. A Torx screwdriver may be needed in this repair. This contains one (1) plastic switch. This is a quick repair. Simply open handle casing, disconnect wires, and remove old switch.
Removed about 4 to 5 torx head screws opened handle area removed torx head screw holding switch down. Used small metal pic and needle nose pliers to release wires on switch and reassembled unit. Also found video on youtube explaining and showing repair. Last time my buffer stopped working i bought a new one, thanks to eReplacement parts i
... Read more no longer will do that, i will repair instead at a very small fraction of price to replace unit.
Read less
Did you find this story helpful?
Thank you for voting!
The polisher just stopped working while working on a project.
I went to the trouble shooting page for my polisher and checked possibilities. The possibilities were listed by item most likely to fail. I chose the first three possibilities and ordered the parts since I didn\'t know what the problem was. I replaced the trigger switch first and that solved the problem. The remaining parts ordered wi
... Read morell be held in reserve for future repairs.
Separated the cover by removing the screws. Removed the screw holding the switch. Removed each wire one by one not to confuse where they go. Reassemble in reverse order. FYI make sure cord is unplugged before starting any repairs.
First I removed the 5 screws holding the cover on. Second I used a voltmeter and the determine that the switch was bad. Third when the new one arrive I removed the one screw holding the switch and then detached the wires going to the switch. Once that was done all I had to do was plug the wires into the new Switch and then do the reverse
... Read moreof taking it apart. Plugged it and afterwards and it worked perfect.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10187265
Manufacturer Part Number: N024326
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of N024326 DeWALT Switch")
_WW_1.gif "Part Location Diagram of N024326 DeWALT Switch")
