A genuine item that is supplied directly from the original equipment manufacturer for use with Craftsman chainsaws. This is a high-quality replacement for the rope which is part of the recoil starter mechanism which allows a user to pull-start the engine. Keep in mind this durable nylon component is sold individually, please note that the plastic grip is sold separately.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy repair, I've should have done it a long time ago. Thanks for making my job easy.
=ƒÿé=ƒÿé=ƒÿé=ƒÿé thanks
Guest - May 7, 2019
Verified Purchase
★★★★★
★★★★★
Great product
Part was as described and works awesome
Iglobal - July 11, 2019
Verified Purchase
★★★★★
★★★★★
Worked as expected
All good good delivery time part excellent s shape too packing
Guest - July 22, 2019
Verified Purchase
★★★★★
★★★★★
Works
Works as intended.
Larry - September 4, 2019
Verified Purchase
★★★★★
★★★★★
It is a rope
What do you expect? It fits, it works, i will see how long it lasts.
Guest - February 28, 2020
Verified Purchase
★★★★★
★★★★★
Back in business
Came fast went together easily
Guest - April 24, 2020
Verified Purchase
★★★★★
★★★★★
It was very easy
The part arrived just in time That I willy needed it
Guest - June 28, 2020
Verified Purchase
★★★★★
★★★★★
Fast service good parts
New parts
Barbara - October 20, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair, great product...work great .
Arrived quickly, it fit perfectly, now my chain saw works great =ƒæì
Dale - February 9, 2021
Verified Purchase
★★★★★
★★★★★
employee help
I had received a wrong part in the beginning. The person that helped me to return that part and assist getting the correct part went out of his way at helping me. I can not thank you and this employee enough.
Guest - April 22, 2021
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed the shroud holding the starter rope and starter spring.
2. Removed the starter rope and engaging spool from the shroud.
3. Removed old starter spring with needle nose pliers.
4. Installed new starter spring in spring housing...kind of tricky. Don;t let spring unravel.
5. Wound new rope on engaging spool
... Read moreand threaded rope through hole in shroud. ,
6. Replaced spool over starter spring.
7. Replaced starter rope shroud.
8. Cut rope to required length...replaced handle...so that pull handle fits snugly against shroud
1. Removed cover screws holding throttle body linkage together on handle.
2. Disconnected throttle cable from throttle trigger.
3. Removed screws holding engine assembly to green housing/cover.
4. While removing engine from housing, disconnected coil wires.
5. Removed, pull chord assembly from housing.
6. Lo
... Read moreosened buton head screw on pull chord assembly and replaced pull chord rope.
7. Reassembled.
put spring into housing
placed the starter pulley on top and turned it 7 rotations.
fed rope into pulley and tightened
let rope slowly wind around starter pulley
placed assembly back on chainsaw
started chain saw to check.
Did you find this story helpful?
Thank you for voting!
Mainly the small recoil spring and itÆs plastic were damaged. I recommend to change all the parts that in the repair kit. The large spring was ok.
I recommend you search you tube. You remove four torx screws. Lift the housing and in the inside remove the center screw. If changing rope and everything else, be careful with the spring behind the rope wheel. It can hurt you if releases itself out of itÆs place. If reusing the same one, you can recoil it with a drill. Search the video in
... Read more you tube. Materials include small board, a drill and nail and some ties or a rubber band. The rest goes in reverse. After you have the rope wheel engaged with the spring below then turn it clockwise until it stops. Hold it securely and lock it with a stop or screwdriver and insert the rope and hold it with the small screw. Let the rope coil counterclockwise. Finish with the knot in the handle. I recommend to take photos before you dismantle the assembly. When you have dismantled the starter, you will probably see what part or parts are damaged or worn out. Wearing eye protection always.
Read less
Did you find this story helpful?
Thank you for voting!
Accidentally ran over chainsaw with bobcat and replace parts that was damage
Watch ereplacementparts on youtube on how to install spring-starter was helpful. I could be wrong but couldn\'t find and order other decals for side the of housing-fan (poulan model P3816) and rear of shield-cylinder (instruction on how to start and stop chainsaw).
1. Obtain a parts breakdown diagram for your trimmer.
2. Using the above, determine what has to come off and how to get it off.
3. In my case, the shaft came off first by removing the Allen bolts. Tip: spray bolts with Kroil Oil or equivalent.
4. Remove the clutch cover by removing 4 Allen bolts. top cover comes off and
... Read morelower cover just comes off next exposing the clutch.
5. Remove the clutch by following the directions on the clutch. Keep parts in order/together as you remove them.
6. Remove the cover right below the clutch with the starter rope assembly.
7. Replace the starter rope and the spring.
8. Reassemble in the reverse order.
9. Now put on the rope handle pulling out the rope until the spring holds the rope handle flush to the case. You adjust by adding knots down the rope as needed to get the handle flush.
10. Test the repair.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9008182
Manufacturer Part Number: 530069232
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
