This is a genuine manufacturer approved replacement part designed for use with Husqvarna chainsaws. The purpose of this rope is to allow user to to start the engine. Includes one (1) fabric rope per order. Please note the grip/handle is sold separately.
Set spring in place/installed rope in pulley/installed into spring and fastened. Wound pulley one rotation short of tight/fed rope threw housing into rubber handle and tied it off. Allowed pulley to unwind. Installed housing back onto saw
Removed top cover. Then remove the worn parts. Removed the rope from the hand grip .Put the new pulley in place then the spring, put the rope in the pulley. Then wound the pulley and spring until I thought It was tight enough. Put the rope thru the housing and attached it to the hand grip. Tightened down cover and let the rope go slowly i
... Read moren
Removed pull start cover panel. (4) screws
Unwound old rope, keeping in mind the direction it came off.
Tied a knot in the end and heated it using a lighter.
Pushed open end though hole in starter spring holder until knot on other end seated.
Wound cord the direction I removed earlier.
Ran open end through
... Read moreguide hole on cover and also throb handle.
Pulled cord until it was toute and tied a knot on handle side.
Melted end with a lighter.
Replace pull starter cover (4) screws
Removed four screws securing the case.
Removed Allen head screw to remove rope pull assembly.
Replaced the parts and wrapped the new rope around the pulley.
Threaded the rope through the eyelet on the case and wound the spring a couple more turns before inserting the rope through the handle and tying a knot. Replaced
... Read morethe case and four screws.
Works perfect.
Read less
Did you find this story helpful?
Thank you for voting!
Starter puller was simply worn out and when I removed it of course the starter spring unwound. Starter rope worn but not broken
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_17.gif "Part Location Diagram of 505305125 Husqvarna Chainsaw Starter Rope")
_WW_17.gif "Part Location Diagram of 505305125 Husqvarna Chainsaw Starter Rope")
